Rehau ABS edgebanding 716041-360 15/16 x .018

Rehau ABS Edgebanding 716041-360 For Clean Edges

Rehau ABS edgebanding 716041-360 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so they match the board and present a clean, professional line on cabinet and casework projects. The product is identified as edge banding in the edgebanding category, so it is designed to cover raw substrate edges and protect them from direct contact during everyday use. The SAP description lists a 15/16 x .018 size, giving a narrow, low-profile band that sits flush on typical panel thicknesses and keeps the edge from feeling bulky. The CP41206 reference in the description identifies a specific design or color code, which helps maintain visual continuity across a run of cabinets or fixtures. The description also notes EMB LAC, signaling an embossed lacquer surface that provides a finished look directly off the edgebander.

Key Edgeband Details That Support Clean Work

• The 15/16 inch width in the SAP description covers standard panel edges with enough overhang for trimming, so installers can plane or trim back to a precise, straight edge without exposing the core material.
• The .018 thickness specified in the description creates a thin edge that blends closely to the face of the board, which reduces the visual seam and helps doors and drawer fronts sit tightly in reveals.
• The ABS material designation identifies a thermoplastic edge suited for bonding to casework substrates, so it works with standard edgebanding processes and supports consistent adhesion along straight runs.
• The CP41206 reference in the SAP description ties this edge banding to a defined finish pattern or color, allowing fabricators to repeat the same look across replacements and additions without visual mismatch.
• The EMB LAC wording signals an embossed lacquer finish on the band, so the edge presents a finished surface straight from the edgebander, saving finishing steps on production jobs.
• The 600FT length in the SAP description provides a long run of material for a project or shop, helping reduce changeovers during edgebanding and keeping long cabinet runs on the same lot of material.

Edgeband Size And Material For Straightforward Runs

The 15/16 x .018 dimension called out in the SAP description defines how this Rehau ABS edge banding sits on typical panel edges, giving just enough width for trimming while remaining visually light at the edge. The ABS material noted in the product name means the band reacts predictably under standard edgebanding equipment, which helps maintain straight, bubble-free edges on cabinet components. The embossed lacquer reference, abbreviated as EMB LAC, describes a prefinished surface on the band that lets the installer move directly from banding to assembly without separate edge finishing steps.

Using Rehau 716041-360 In Cabinet Projects

Where This ABS Edge Banding Fits Best

This product is classified as edge banding in the edgebanding category, so it is suited to finishing exposed edges on cabinets, casework, and similar woodworking assemblies where raw substrate edges need to be covered. The 15/16 inch width noted in the SAP description aligns with common panel thicknesses, which helps on door, drawer front, and shelf edges where a modest overhang is needed for trimming but not so much that waste or extra cutting time increases. Because the band is ABS, as stated in the product name, it is appropriate for shops geared toward thermoplastic edging, keeping material choices consistent across different colors and patterns. The CP41206 design reference in the SAP description links this band to a specific look, helping fabricators maintain the same appearance when mixing straight edges, curved work, and later service replacements on the same project.

Details That Support Repeatable Edge Results

The .018 thickness listed in the SAP description means this Rehau ABS edge banding creates a relatively thin edge, which helps trimming equipment produce a smooth transition from edge to face without a large radius or heavy lip to feather out. That thickness also matters when doors and drawer fronts are ganged closely, because the slimmer edge leaves more room for functional reveals. The embossed lacquer finish indicated by EMB LAC in the SAP description gives the band a pre-applied surface treatment, allowing installers to rely on a consistent sheen and texture from roll to roll. The 600FT length in the description provides enough material for extended production runs, which supports color and finish consistency across banks of cabinets or repeated components. Identifying the product by the manufacturer part number 716041-360 helps shops call out the same material whenever they reorder, decreasing the chance of mixing different edge looks on the same line of cabinetry.

Practical Questions About Rehau ABS Edgebanding 716041-360

Select Rehau ABS Edgebanding 716041-360 For Your Next Run

Rehau ABS edgebanding 716041-360 combines a 15/16 x .018 size, embossed lacquer finish, and ABS construction to support straightforward edgebanding work on cabinet and case goods. The CP41206 reference and manufacturer part number 716041-360 define a specific look that can be repeated reliably across projects. The 600FT length described in the SAP record suits production environments that value long, uninterrupted runs of the same edge material. For projects calling for ABS edge banding in this size and finish family, this Rehau option from Wurth Baer Supply aligns with that set of requirements.