Rehau ABS edgebanding 716041-361 15/16 x .018

Rehau ABS Edgebanding 716041-361 For Clean Edges

Rehau ABS edgebanding 716041-361 is an ABS edge banding designed to finish exposed panel edges so they present a clean, uniform appearance across a run of casework. The 15/16 inch width covers standard panel thickness with a bit of overhang, which supports tight trimming and reduces risk of chip-out at the edge. The .018 inch thickness provides a slim, furniture-style edge that keeps the panel profile looking refined rather than bulky. The CP41351 reference and embossed lacquer description indicate a specific decorative design and surface texture, which supports visual alignment with matching laminated surfaces on cabinet or fixture projects. The 600 ft length is suited to production or multi-cabinet runs, helping installers work through a sequence of parts without frequent roll changes or interruptions in workflow.

Key Rehau Edgebanding Details That Matter

• The ABS edge banding material is suited for panel edging, which allows fabricators to cover raw substrate edges so projects look finished on all visible sides during installation.
• The 15/16 inch width gives coverage beyond typical sheet thickness, which lets installers trim back to a crisp edge, helping doors, drawer fronts, and carcass edges align visually in the finished work.
• The .018 inch thickness creates a slim edge profile, which is useful when a cleaner, furniture-style look is needed on cabinetry or fixtures without adding noticeable bulk to the panel.
• The CP41351 designation and embossed lacquer description define the decorative character, which supports consistent color and texture matching with coordinated laminated surfaces across a job.
• The 600 ft length supports longer runs of casework, which helps shops handle multiple cabinets or repeated components while keeping the same design and finish across the entire project.

Edgebanding Size And Finish For Practical Installation

This Rehau ABS edgebanding uses a 15/16 inch width, which gives installers enough coverage to center the band on standard panel thicknesses and still have material to trim flush on both faces. The .018 inch thickness means the edge remains easy to trim without creating a pronounced lip, which helps achieve smooth transitions between banded edges and finished faces. The embossed lacquer description signals a textured, finished surface, so the band edge reads as a deliberate design element rather than a raw plastic strip when cabinets or fixtures are in place. The CP41351 reference and Rehau 716041-361 part number identify a specific visual design, which supports repeatable selection when the same look is required on future phases or replacement parts.

Using Rehau 716041-361 Edgebanding In Woodworking

Where This ABS Edgebanding Fits Best

Rehau ABS edge banding with part number 716041-361 is positioned for use wherever exposed panel edges need a finished look that coordinates with CP41351 embossed lacquer surfaces. The edge banding category places it within common cabinet and furniture construction, so it fits naturally into casework, shelves, and door or drawer fronts built from panel stock. The 15/16 inch width accommodates edging on typical panel dimensions used in the woodworking industry, supporting consistent coverage across verticals, horizontals, and interior partitions. With 600 ft available on a roll, this edgebanding supports shop runs that extend across multiple cabinets, fixtures, or repeated components in a commercial build-out, keeping the same color and texture through all visible edges.

Details That Support Consistent Edge Results

The .018 inch thickness of this ABS edgebanding from Rehau works in favor of consistent trimming because the material is thin enough to cut cleanly while still forming a defined edge line. That balance lets installers produce a professional edge without excessive rounding or loss of definition when finishing the panel. The CP41351 embossed lacquer description means the surface carries a defined texture and sheen, which helps the edge transition visually into matching laminated faces so seams appear controlled and intentional. The Rehau name and the specific manufacturer part number 716041-361 give shops a precise reference, supporting reorders when additional cabinets, fixtures, or replacement components are produced later. The 600 ft run length also supports batching work, so operators can set up for one edgeband design and carry that setup through a large portion of a job before changing rolls.

Common Questions About Rehau 716041-361 Edgebanding

Choose This Edgebanding For Matching Panel Edges

Rehau ABS edgebanding 716041-361 combines a 15/16 inch width, .018 inch thickness, and CP41351 embossed lacquer design to support clean, coordinated panel edges on cabinet and casework jobs. The 600 ft length suits production-oriented shops that need consistent appearance across repeated components and multiple units. Selecting this specific Rehau 716041-361 part number keeps edge details aligned with CP41351 surfaces, helping projects carry the same visual story from panel face through every exposed edge.