Rehau ABS edgebanding 716041-363 is an ABS edge banding designed to finish exposed panel edges on woodworking projects, so cabinet, furniture, and fixture panels present a clean, professional look at every visible edge. The 15/16 inch width from the 15/16X.018 CP20936 EMB LAC 600FT specification gives coverage that works with typical 3/4 inch panel construction, leaving enough material for trimming flush without risking adhesive squeeze-out on the face. The .018 inch thickness allows the banding to follow normal cabinet contours while still giving the edge a defined, finished appearance that stands up to everyday shop and site handling. The CP20936 EMB LAC description indicates an embossed lacquer surface, which provides a textured, coated finish that visually upgrades raw board edges. The 600 ft length supports production runs or multiple jobs without frequent roll changes, which helps keep edging workflow steady.
The 15/16X.018 CP20936 EMB LAC 600FT specification defines how this ABS edgebanding behaves during installation and trimming. The 15/16 inch width provides enough overhang on 3/4 inch stock, which gives edgebander cutters or hand trimmers material to work with while still keeping waste under control. The .018 inch thickness contributes to smooth trimming and scraping because the material is substantial enough to cut cleanly without leaving feathered edges along cabinet doors or shelves. The CP20936 embossed lacquer surface finish gives the outer face of the banding its textured, coated character, which means the finished edge visually aligns with specified surface designs and hides the core of the panel at every visible side.
This Rehau ABS edgebanding, identified by manufacturer part number 716041-363 and the 15/16X.018 CP20936 EMB LAC 600FT description, is positioned as edge banding for woodworking applications. The ABS construction places it in line with typical cabinet and furniture production where ABS edges are called out to finish melamine, composite, or similar panel cores, so fabricators can match exposed edges to the chosen surface design. The 15/16 inch width works for edging vertical cabinet sides, shelves, and fronts cut from common sheet goods, giving enough margin to handle minor panel size variance without exposing the core after trimming. With a 600 ft length, this roll supports shop environments producing multiple cabinets, case runs, or fixture sets from the same material specification.
The CP20936 EMB LAC notation identifies the embossed lacquer surface treatment, which means the banding carries a textured, coated face that visually upgrades otherwise raw panel edges. That finish characteristic helps maintain a unified appearance across doors, drawer fronts, and carcass edges, because the edge treatment ties visually to the selected design. The .018 inch thickness contributes to repeatable processing on edgebanders or through manual edge tools, since the material profile is consistent along the 600 ft roll, supporting steady feed, trim, and scrape settings. Together, the specified width, thickness, surface description, and length define a banding that integrates into routine cabinet, furniture, or fixture workflows where ABS edge banding is required by job detail or shop standard.
Rehau ABS edgebanding 716041-363 is specified as 15/16X.018 CP20936 EMB LAC 600FT, meaning it is 15/16 inch wide and .018 inch thick on a 600 ft roll for extended edging runs.
The 15/16 inch width gives coverage beyond typical 3/4 inch panels, providing trim allowance so installers can route or file the edge flush without exposing the panel core.
The .018 inch thickness lets the ABS edgebanding flex with normal panel tolerances while still trimming cleanly, helping produce a defined, professional edge profile on doors and casework parts.
The CP20936 EMB LAC description indicates an embossed lacquer surface, so the banding has a textured, coated finish that visually refines exposed panel edges across the project.
The 600 ft roll length allows longer cabinet or furniture runs from a single roll, reducing changeovers and supporting a more continuous edgebanding workflow in the shop.
This ABS edge banding is identified for woodworking applications, fitting cabinet, furniture, and fixture projects where ABS edging is specified to finish exposed panel edges.
Rehau ABS edgebanding 716041-363 delivers a 15/16 inch width, .018 inch thickness, CP20936 embossed lacquer surface, and 600 ft length, all defined in the 15/16X.018 CP20936 EMB LAC 600FT specification. Those details support clean, consistent edges on cabinetry, furniture, and fixture work where ABS banding is part of the job standard. For shop runs that call for this exact combination of width, thickness, finish description, and roll length, this edge banding aligns with production-focused panel fabrication.
Sold In: 1 Roll