Rehau ABS edgebanding 716041-376 is an ABS edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects present a finished, uniform line instead of exposed core material. The 15/16 inch width allows this edgebanding to cover standard 3/4 inch panels with a small overhang for trimming, which supports tight, flush edges after processing. The .018 inch thickness keeps the banding thin enough for standard edge banding machines while still forming a defined edge, helping maintain a consistent profile across multiple parts. The CP41423 designation identifies the specific decor match, so this material can align with coordinated board or laminate selections in a job. The embossed lacquer (EMB LAC) finish provides a textured, lacquered surface that visually upgrades panel edges to match finished faces. The 600FT length supports longer production runs or multiple projects without frequent roll changes.
The 15/16X.018 size noted in the description defines both width and thickness in one line, so machine operators can set guides, pressure rollers, and trimming stations to match this ABS edge banding without trial-and-error. The embossed lacquer identification (EMB LAC) tells finishers and fabricators that the surface carries a textured, lacquered treatment, which supports matching to panels or doors that share the same decor system. The ABS construction keeps this edging in the ABS edgebanding category, aligning it with tooling and adhesives already used for similar plastic tapes in many woodworking shops. Together, these details give installers and fabricators a clear profile of how this Rehau, Inc. edge banding will run and look on cabinet or furniture components.
This Rehau ABS edgebanding, in the 15/16X.018 CP41423 EMB LAC 600FT format, is suited to edging panels that fall in the 3/4 inch class used in many cabinet and casework builds, because the width is sized to cover that thickness with trim allowance. The CP41423 decor identification ties the edgeband to a specific visual program, so it can be used where panels, doors, or drawer fronts follow that same design, helping maintain a coordinated look across a full room or fixture. As an ABS edge banding, it fits projects that standardize on ABS materials for edging, aligning with existing adhesives and handling practices used in woodworking production. The 600FT length supports shops that cut multiple cabinet boxes, shelves, or fronts from the same panel program, allowing them to complete runs with a single, consistent edging source.
The 15/16 inch width on this Rehau, Inc. edge banding matters because it gives fabricators the extra coverage needed to trim both faces of a 3/4 inch panel, which helps achieve flush, chip-free edges after machining. The .018 inch thickness influences how the edge feels and trims, staying thin enough for precise shaping while still defining a clear transition between face and edge. The embossed lacquer surface treatment (EMB LAC) affects both appearance and handling, delivering a textured, lacquered edge that visually ties into matching decor while still presenting a process-ready surface. The CP41423 code gives designers and shop managers a reliable reference when specifying or reordering, so the same ABS edgebanding decor can be used again on repeat jobs. The 600FT length directly supports efficiency on the shop floor by providing substantial footage from a single roll, which helps maintain uniform edges across large or repeat cabinet and furniture projects.
Rehau ABS edgebanding 716041-376 is an ABS edge banding from Rehau, Inc. that covers raw panel edges, so cabinets and furniture present a finished edge instead of exposed core.
The 15/16 inch width gives slight overhang beyond 3/4 inch panels, allowing trimming on both sides to create flush, clean edges across doors, shelves, and casework parts.
The .018 inch thickness keeps the ABS edge banding thin for smooth running on typical edgebanders while still giving a defined edge profile that trims cleanly during finishing.
The CP41423 EMB LAC description identifies a specific decor and an embossed lacquer surface, so the edge visually coordinates with matching panel designs in that decor system.
The 600FT length gives extended footage of ABS edgebanding from a single roll, supporting longer cabinet or furniture runs with consistent edging across many parts.
The 716041-376 manufacturer part number uniquely identifies this Rehau ABS edging, helping shops match the same size, decor, and finish on repeat or expansion projects.
This Rehau ABS edgebanding 716041-376 pairs ABS construction with a 15/16X.018 size, CP41423 decor code, embossed lacquer surface, and 600FT length, giving woodworking professionals a defined edging option for 3/4 inch-class panels. By aligning width, thickness, and finish in one ABS edge banding, it supports consistent cabinet and furniture projects that follow the CP41423 design program. For shops standardizing on ABS edgebanding from Rehau, Inc., this part ties directly to the 716041-376 reference, simplifying selection when a coordinated edge treatment is needed.
Sold In: 1 Roll