Rehau ABS edgebanding 716041-377 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges for woodworking and cabinet projects, so raw board edges are covered with a consistent, project-ready edge material. The 15/16 inch width stated as 15/16 in the description gives coverage for standard panel thickness with a small trimming margin, which helps installers achieve a flush, professional edge after trimming. The .018 inch thickness specified in the SAP description balances flexibility with a low-profile edge, helping the material conform to edges while leaving a slim finished line. The CP41431 reference in the description identifies the specific decor or program series for visual coordination across panels, which matters when matching this edge to corresponding surfaces in a job. The EMB LAC notation points to an embossed lacquer style, supporting a textured, coated appearance that aligns edge look with contemporary board finishes.
The 15/16 inch width, presented as 15/16X.018 in the SAP description, gives enough material beyond the panel face to trim back after bonding, supporting standard edgebander and hand-application workflows. The .018 inch thickness in the same description keeps the material relatively thin, which helps the band wrap and sit tight to the substrate edge when properly processed. The ABS edgebanding designation in the product name confirms it is an ABS-based edge banding, aligning with equipment and processes that are set up for ABS materials in cabinet and furniture production environments.
The product class listed as edge banding defines this item as an edge treatment for board edges in woodworking applications, so it plays the role of finishing exposed edges on cabinets, furniture, or fixtures using compatible materials. The 15/16 inch width described in the SAP string as 15/16X.018 gives a small margin beyond typical panel thicknesses, allowing automatic or manual trimming to remove slight overhang and leave the face material and edge flush. This extra width reduces risk of undersized coverage at the edge, helping installers avoid exposed substrate on straight runs. The .018 inch thickness identified in the same description supports a subtle edge reveal once trimmed, which helps keep the transition between face and edge visually minimal on finished pieces. Because the product name identifies it as ABS edgebanding, it fits workflows where ABS edges are preferred for use with established ABS-capable edgebanders and adhesives in professional shops. The Rehau, Inc. brand association confirms the manufacturer, aligning this edgebanding with other Rehau programs for projects that follow a specific manufacturer system.
The CP41431 reference in the SAP description ties this edge banding to a defined decor or program, which matters when a project is designed around that specific series and requires visual continuity across doors, drawer fronts, and casework edges. This link supports consistent selection when matching edge material to corresponding surfaces that follow the same CP41431 designation. The EMB LAC notation in the description indicates an embossed lacquer style, contributing to a textured and lacquer-like appearance on the edge so it visually coordinates with decorative boards that share that look. This combination helps reduce visual mismatch between panel face and edge, supporting a cohesive appearance on finished work. The 600FT length cited in the SAP description positions this product for extended production runs or multi-unit projects because a single roll length can span many edges before changeover. Fewer roll changes help keep machines running longer between interruptions, which can support smoother production flow on repetitive cabinet or fixture jobs.
Rehau 716041-377 edgebanding is identified in the product name as ABS edgebanding, so it uses ABS material, aligning with processes and settings intended for ABS edge banding in woodworking shops.
Rehau ABS edgebanding 716041-377 is listed in the SAP description as 15/16X.018, meaning the width is 15/16 inch, giving margin for trimming to a flush finished edge.
The .018 value in the 15/16X.018 SAP description identifies the thickness of the edgebanding, providing a thin profile that helps create a subtle transition between the panel face and edge.
The SAP description specifies 600FT, indicating a roll length of 600 feet, which supports longer production runs or multiple cabinet projects from a single roll.
The CP41431 reference in the SAP description identifies a specific decor or program, helping align this edge banding with matching surfaces or design schemes that follow the same CP41431 designation.
The EMB LAC notation in the SAP description signals an embossed lacquer style, contributing to a textured, lacquer-like appearance that coordinates with similar decorative board finishes.
Rehau ABS edgebanding 716041-377 combines a 15/16 inch width, .018 inch thickness, and CP41431 EMB LAC decor in a 600FT roll, so installers can match edges to the specified program while covering multiple panels in one run. For projects built around CP41431 visuals and ABS processes, this edge banding links Rehau, Inc. manufacturing with the dimensions and style needed to carry that design cleanly across cabinet or furniture edges.
Sold In: 1 Roll