Rehau ABS edgebanding identifies this product as ABS edge banding from Rehau, Inc., so it serves as a dedicated solution for finishing exposed panel edges in woodworking projects. The product is categorized as edge banding under the edgebanding category, which means it is intended to cover raw substrate edges for a more finished appearance in cabinet, furniture, or fixture work. The SAP description lists 15/16X.018 as the size, so the strip is sized to cover standard panel thicknesses while keeping a low-profile edge. That same description specifies CP41356 EMB LAC, indicating this edge banding follows a CP41356 reference with an embossed lacquer surface that provides a defined texture and sheen along the edge. The 600FT notation in the description shows this is supplied in a 600-foot length, which supports continuous runs and reduces changeovers during larger jobs.
The SAP description lists the Rehau ABS edgebanding as 15/16X.018, so installers are working with an edge banding strip sized to cover standard panel edges while leaving material to trim for a flush finish. The relatively thin .018 thickness helps the banding sit close to the face material, supporting a clean transition after trimming and finishing steps. The CP41356 EMB LAC reference in the description signals an embossed lacquer surface, so the working face of the banding presents both texture and sheen that can visually track with corresponding board finishes. Because the length is identified as 600FT, a single roll spans many cabinet or panel edges, which supports continuous workflow on edge banding machines or manual setups without frequent roll changes.
The manufacturer listed as Rehau, Inc. and the product class of edge banding define the Rehau 716041-385 ABS edgebanding as a component aimed at woodworking and casework production. The categorization under Miscellaneous|Edgebanding places it within the broader edgebanding family, so it fits environments where panels and components need their raw edges covered for visual consistency. The 15/16X.018 dimension in the SAP description aligns with edge coverage on typical sheet goods, allowing fabricators to apply this banding on cabinet carcasses, shelves, doors, or partitions that match that nominal thickness. Because the banding length is specified as 600FT, it can support production settings where many similar components are processed in sequence, with a single roll serving multiple units in a run.
The 15/16 width called out in the SAP description gives installers coverage that slightly exceeds common panel thicknesses, so there is material available for trimming back to a tight, flush edge that improves the finished appearance. The .018 thickness described in the same line keeps the ABS banding relatively thin, supporting easier trimming and reducing the edge step between the banding and the panel face, which matters when aiming for a smooth, uniform edge profile. The CP41356 EMB LAC notation records an embossed lacquer finish reference, so the face of the banding carries a defined look that can align with embossed or lacquered boards, helping the edge match the panel surface visually on cabinets or furniture. The 600FT length described supports long, uninterrupted edgebanding passes on machines or in manual workflows, which helps maintain consistent results from the first part in a run through to the last. The connection to the Wurth Baer Supply web description WBSC - 1432 - RU716041-385 allows shops to specify this exact finish and dimension set again on future jobs, supporting repeatable aesthetics across multiple projects.
Rehau 716041-385 is ABS edge banding from Rehau, Inc., so it is used to cover and finish exposed panel edges in cabinet, furniture, or general woodworking projects.
The SAP description lists this Rehau ABS edgebanding as 15/16X.018, meaning it has a nominal 15/16-inch width and approximately .018-inch thickness for covering typical panel edges.
The CP41356 EMB LAC reference in the description indicates an embossed lacquer surface, so the banding face presents a textured and lacquered appearance suited to matching similar board finishes.
The SAP description specifies 600FT, so this Rehau ABS edgebanding is supplied in a 600-foot length to support extended edging runs in production or shop settings.
This product is listed under the Miscellaneous|Edgebanding category with web description WBSC - 1432 - RU716041-385, so it aligns directly with Wurth Baer Supply ordering systems.
The manufacturer is Rehau, Inc., so the ABS edgebanding comes from a dedicated edge banding producer within the woodworking supply segment.
The Rehau ABS edgebanding identified as manufacturer part 716041-385 and SAP description 15/16X.018 CP41356 EMB LAC 600FT offers a defined combination of size, finish reference, and length for edge work. The 15/16X.018 dimension supports coverage and trimming on standard panel edges, while the CP41356 EMB LAC notation signals a specific embossed lacquer appearance to coordinate with matching surfaces. With the 600FT length and direct listing under Wurth Baer Supply web description WBSC - 1432 - RU716041-385, this edge banding is positioned for repeatable selection whenever that same look and dimension are needed across projects.
Sold In: 1 Roll