Rehau ABS edgebanding 716041-387 is an ABS edge banding from Rehau, Inc. that covers and finishes raw panel edges so cabinet and furniture projects present a unified surface. The 15/16 inch width gives coverage across standard panel thicknesses while allowing slight overhang for trimming, which supports accurate flush finishing along cabinet and casework runs. The .018 inch thickness provides a low-profile cap on exposed edges, so doors, drawer fronts, and shelving keep a slim, built-in look in assembled work. The CP60536 designation and embossed lacquer detail identify a specific surface and sheen combination, allowing shops to match this band to panel programs that call for this texture in drawings or cut lists. The 600 ft length in one continuous run supports longer production sequences, so installers and shops can edge multiple components in the same project using a single material reference.
The 15/16 inch width on this Rehau ABS edgebanding gives working room on both faces of a substrate edge, so trimming tools can take a controlled pass without exposing core material. The .018 inch thickness keeps the band near flush with adjacent faces after trimming, which supports door and drawer operation where components pass closely. The ABS edge banding format presents a stable, continuous strip along its 600 ft length, so feed systems on edgebanders receive a consistent profile during setup and production. The CP60536 embossed lacquer specification defines the working face texture, assisting installers in orienting the band correctly when lining up visible cabinet edges.
This Rehau, Inc. ABS edgebanding sits in the edgebanding category as edge banding for covering exposed substrate edges on cabinets, furniture, and other panel-based builds. The 15/16 inch width is sized for edges on panels that fall near that dimension, so carcass sides, tops, shelves, and fronts can share one band reference in a project. The .018 inch thickness works where designers want a subtle edge presence that does not visually add bulk to doors or drawer fronts. The CP60536 embossed lacquer surface positions this banding for use on jobs specifying that particular designation, so visible cabinet runs can follow the same finish note from cut list through installation.
The 600 ft length of this Rehau ABS edgebanding 716041-387 supports repeatable results by letting shops run many parts from a single coil, so color and finish remain consistent across a complete room or bank of cabinets. The ABS edge banding format provides a defined edge profile, giving feed rollers and guides a predictable shape to track against during edging passes. The 15/16 inch width creates a margin that allows installers to reference the band over slightly variable cut edges while still finishing to a clean line, which helps reduce rework from exposed substrate. The .018 inch thickness controls how much material stands proud before trimming, supporting even scrape or sand passes so edges finish uniformly. The CP60536 embossed lacquer detail signals which face is the finished side, guiding orientation so that the visible edge always presents the intended surface on doors, drawer fronts, and finished panels.
Rehau 716041-387 is an ABS edge banding from Rehau, Inc., so it is used to cover and finish raw panel edges on cabinets, furniture, and other panel-based constructions.
The 15/16 inch width spans typical panel edges with a small overhang, allowing trimming equipment to cut back to a flush, clean edge across cabinet parts.
The .018 inch thickness creates a thin edge layer that preserves design clearances and reveals, supporting smooth operation where doors and drawers run close together.
CP60536 embossed lacquer identifies the specific surface and lacquered texture on this banding, helping projects match visible edges to panels calling for this finish code.
The 600 ft length lets shops edge many components from one run, supporting consistent color and surface across large cabinet jobs or multiple related projects.
This ABS edge banding fits on exposed edges of panel components so cabinet sides, tops, shelves, and fronts share a coordinated finished edge in the overall assembly.
Rehau ABS edgebanding 716041-387 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and CP60536 embossed lacquer surface in a single 600 ft run, giving installers and shops a defined edge banding reference for coordinated cabinet and furniture projects.
Sold In: 1 Roll