Rehau ABS edgebanding is an ABS edge banding product from Rehau, Inc. that covers and finishes exposed board edges, so cabinet and furniture panels present a uniform, professional edge instead of raw core material. The 15/16 inch width gives coverage across standard panel thicknesses with a bit of tolerance, which helps installers align the strip cleanly over the face and back corners. The .018 inch thickness keeps the edge slim, which supports tight visual lines along doors, drawer fronts, and shelves in detailed work. The SAP description identifies this roll as CP60532 EMB LAC, 600FT, tying the color and finish combination to a defined code so future jobs can repeat the same look. The ABS material classifies this as a thermoplastic edgeband, which suits typical cabinet and woodworking environments where a durable, uniform edge is needed along linear runs.
The 15/16 x .018 sizing in the SAP description defines how the edgeband fits typical panels, so installers can choose it when they want a narrow overhang to trim away without excess waste. The 15/16 inch width lines up well with many cabinet side, top, and shelf thicknesses, helping the band cover both faces while still allowing trimming equipment to run smoothly. The .018 inch thickness keeps the material light enough for standard edgebanding application equipment or careful manual work, which can streamline setup on shop runs and on-site finishes. Because the SAP entry specifies 600FT, this roll length supports longer continuous runs or multiple cabinets from a single coil, reducing changeovers during production.
The Rehau ABS Edgebanding, 716041-388 sits in the Miscellaneous|Edgebanding category, placing it squarely in applications where exposed board edges need a defined, matching strip rather than paint or veneer. The ABS Edge Banding product class signals that it is suited for edging cabinet cases, shelves, and furniture components in woodworking shops and on installation sites. With its 15/16 inch width, it fits situations where panels are close to that dimension in thickness, so the band can wrap the edge and still offer small excess for trimming on each face. The 600FT length specified in the SAP description supports batch production runs, where running many doors or panels from the same coil keeps color and finish consistent over a job.
The manufacturer part number 716041-388 anchors the exact color and finish combination, which allows shops to call out this code on cut lists and project documents for repeatable ordering. The CP60532 EMB LAC designation in the SAP description further identifies an embossed lacquer style within the Rehau ABS edge banding line, helping users match surface texture and sheen across panels and replacement parts. The .018 inch thickness described in the SAP record works well when uniform trimming is needed, because a thinner band can transition smoothly to the panel surface, reducing the amount of final edge finishing. The Rehau, Inc. branding ties this edgeband to a known manufacturer of ABS edge solutions, which can support continuity for shops that standardize on specific edge materials. The 600FT coil length called out in the SAP line also means a single roll can serve multiple cabinets or casework runs, supporting efficient material staging around edgebanding equipment.
Rehau ABS Edgebanding, 716041-388 is an ABS edge banding product from Rehau, Inc., used to cover and finish exposed panel edges in cabinet and woodworking projects.
The SAP description lists the edge banding as 15/16 x .018, indicating a 15/16 inch width and .018 inch thickness, which guides fit and trimming approach on panel edges.
The SAP description specifies 600FT, meaning the coil provides approximately 600 feet of ABS edge banding for extended runs or multiple cabinet jobs.
The CP60532 EMB LAC code in the SAP description identifies a specific color and embossed lacquer style, helping users match surface look across components.
Within Wurth Baer Supply, this item appears under the Miscellaneous|Edgebanding category and Edge Banding product class, confirming its purpose as edge treatment material.
The 716041-388 ABS edge banding is manufactured by Rehau, Inc., identified by the brand listing and manufacturer part number in the product data.
The Rehau ABS Edgebanding, 716041-388 aligns width, thickness, and coil length for cabinet and furniture edge finishing where ABS Edge Banding is specified. The 15/16 x .018 dimensions and 600FT length described in the SAP record support both shop runs and field work that rely on consistent edges. The CP60532 EMB LAC designation and 716041-388 manufacturer part number tie color and finish to a precise code, helping projects repeat the same appearance over time. For jobs that call for ABS edgebanding tied to Rehau, Inc. codes, this edge banding offers a defined, repeatable option.
Sold In: 1 Roll