Rehau ABS edgebanding 716041-550 is an ABS edgebanding from Rehau, Inc. that finishes the exposed edges of panels so the workpiece has a defined, uniform edge instead of raw core material. The 15/16 inch width covers standard panel thickness with a small overhang, giving room to trim flush for a straight, consistent line along cabinet and furniture edges. The .018 inch thickness keeps the edge profile slim, which helps the band follow panel edges without adding bulk at doors or drawer fronts. The CP41020 designation identifies the specific color or pattern within the Rehau range, which keeps visual match consistent across a project when the same code is used. The 600FT length is suited to continuous production runs, supporting long stretches of edging work before a roll change is required.
This Rehau ABS edge banding uses a 15/16 inch width so the installer has slight margin on each side of a typical panel face, which simplifies trimming operations and helps produce a straight, even edge. The .018 inch thickness keeps the band light and conformable along the substrate, which is helpful when working around long edges where consistent adhesion and flush trimming are important. The ABS material designation means the band is thermoplastic, so it is suitable for use in standard edgebanding workflows that rely on this class of material. With 600FT available on this item, the same dimensioned material can be run from start to finish on a set of cabinets or casework, maintaining a common edge look throughout.
This Rehau ABS edgebanding is classified under Edgebanding and is used to cover and finish panel edges in woodworking-related projects. The 15/16 inch by .018 inch size works along exposed sides of cabinet cases, shelves, and fronts where a narrow, consistent strip is needed to mask core material. The CP41020 coded finish ties the edge to a specific Rehau appearance, which supports using the same identification when matching existing jobs or coordinating multiple components in the same project. Because the item length is 600FT, it supports production-style runs where many linear feet of panel edges must be banded in the same size and finish.
The combination of 15/16 inch width and .018 inch thickness allows this ABS edge banding to sit slightly proud of the panel during application, then trim down to a controlled, repeatable edge line. That proportion helps maintain the same reveal on door and drawer fronts across a run, which supports visual alignment of cabinet faces. The CP41020 LAC identification and manufacturer part number 716041-550 give a stable reference for reordering, which matters when a shop wants later work to match the original edge appearance. Having the material supplied in a 600FT length keeps the same specification running across many pieces without mid-project changes, which helps maintain consistency in both color reference and edge profile from the first panel to the last.
The Rehau 716041-550 edgebanding is identified as ABS edgebanding, so it uses an ABS thermoplastic edge material suited to covering and finishing panel edges.
The Rehau ABS edgebanding has a width of 15/16 inch and a thickness of .018 inch, which supports slim, trim-to-flush edging on typical panel work.
The Rehau ABS edgebanding 716041-550 is specified at 600FT in length, allowing many linear feet of panel edges to be finished from one continuous roll.
The CP41020 LAC wording in the description identifies a specific Rehau specification for this edgebanding, tying the roll to a consistent appearance reference.
The 15/16 inch width provides slight overhang on typical panel thickness, giving trimming room to achieve a clean, flush edge along cabinet or furniture parts.
The manufacturer part number 716041-550 ties this ABS edgebanding to a defined Rehau specification, supporting consistent reordering for matching projects.
The Rehau ABS edgebanding 716041-550 pairs a 15/16 inch width with a .018 inch thickness to support clean, flush trimming on cabinet and panel projects. With CP41020 LAC identification and a 600FT length, this Rehau, Inc. edgebanding keeps edge appearance and dimensions consistent across extended runs. Using the defined manufacturer part number 716041-550 aligns future orders to the same ABS edgebanding, helping maintain a unified look from job to job.
Sold In: 1 Roll