Rehau ABS edgebanding 716041-552 is an ABS edge banding from Rehau, Inc. that provides a finished edge on panel and board projects, giving casework and fixtures a defined perimeter ready for installation into cabinets, furniture, or interior build-outs. The product name identifies it as Rehau ABS edgebanding, so it works as a dedicated edge solution rather than a multipurpose strip, which supports repeatable results across runs of similar components. The SAP description "15/16X.018 CP70059 LAC 600FT" specifies that this edgebanding is 15/16 inch wide and .018 inch thick, so it covers common panel thicknesses while keeping build-up at the edge minimal for a crisp transition between face and edge. That same description also confirms a 600 foot length, allowing longer production runs and fewer changeovers when banding multiple cabinets or case parts in a single job.
The SAP description stating 15/16 inch width gives installers a clear sense of overhang when applying this Rehau ABS edgebanding to common panel thicknesses, so trimming equipment and passes can be set for predictable cleanup. The .018 inch thickness noted in the same description indicates a relatively thin band, which affects how trimming heads, scrapers, and sanding operations are dialed in to avoid cutting into the panel surface. With 600 feet of material specified, a single roll supports continuous feeding on edgebanders during longer runs, helping maintain a single machine setup and uniform edge quality from the first part to the last.
The product class listed as Edge Banding and the category entry of Edgebanding define this Rehau ABS edgebanding as material for finishing raw panel edges on cabinets, furniture parts, or other board-based components. Because the SAP description calls out 15/16 inch width, it suits edges on typical sheet goods where a modest amount of overhang is needed for trimming without excessive waste. The .018 inch thickness described allows it to sit close to the panel face after trimming, which supports applications where a more subtle edge is preferred over a heavy build-up. With 600 feet of material specified, shops can run multiple cabinets, doors, or shelves in one sequence, which benefits both production environments and serious DIY projects involving many matching pieces.
The SAP description "15/16X.018 CP70059 LAC 600FT" combines width, thickness, and length information in one reference, so operators can set edgebanders, trimmers, and finishing steps to known values and repeat those settings whenever this Rehau ABS edgebanding 716041-552 is used again. The 15/16 inch width directly affects how much edge overhang exists before trimming, helping reduce rework due to insufficient coverage or excessive removal. The .018 inch thickness influences how closely the band can be flushed to the face without leaving a noticeable ridge, which matters on visible cabinet fronts and exposed shelving. The 600 foot length supports planning for batch work, because shops can estimate how many parts one roll will cover based on edge-per-part calculations. The manufacturer part number 716041-552 ties all of these traits to a single identifier, making it straightforward to match previous projects or standardize on this ABS edge banding across production lines.
Rehau 716041-552 is an ABS edge banding identified as Rehau ABS edgebanding, so it is used to finish and cover exposed panel edges on cabinets, furniture, and other board components.
Rehau ABS edgebanding 716041-552 has a width of 15/16 inch as stated in the SAP description, giving coverage that allows light trimming while fully covering typical panel edges.
This ABS edge banding has a thickness of .018 inch according to the SAP description, which helps produce a low-profile edge that blends closely with the panel face after trimming.
The SAP description lists 600FT, so this Rehau CP70059 LAC edgebanding provides 600 feet of material, allowing extended runs of cabinet parts or shelves from a single roll.
The 716041-552 manufacturer part number uniquely identifies this Rehau ABS edgebanding, helping shops reorder the same edge banding for matching future work or repairs.
The 15/16 inch width sets a predictable overhang on common panel thicknesses, allowing edgebanders and trimmers to be adjusted for efficient removal while retaining full edge coverage.
This Rehau ABS edgebanding 716041-552 from Wurth Baer Supply offers a 15/16 inch width, .018 inch thickness, and 600 foot length, so shops and dedicated DIY users can plan edge treatments around known dimensions and material yield. Choosing this ABS edge banding with its specific SAP description lets production teams repeat setups and results whenever the same edge profile and coverage are required on future cabinet or furniture runs.
Sold In: 1 Roll