Rehau ABS edgebanding 716041-584 15/16 x .018 600FT

Rehau ABS Edgebanding 716041-584 For Clean Edges

Rehau ABS edgebanding 716041-584 is an ABS edge banding from Rehau, Inc. that covers and protects raw substrate edges, helping finished parts present a uniform, professional edge profile across cabinet and furniture jobs. The product is identified as edge banding in the Edgebanding category, so it is intended to cap exposed board edges where panels are cut to size, turning open core or laminate transitions into a single, continuous edge surface. The SAP description 15/16X.018 CP41088 LAC 600FT confirms the banding is approximately 15/16 inch wide and .018 inch thick, which suits edging typical panel thicknesses where a narrow, precise band is preferred instead of a wider strip. The 600FT detail indicates a long run length, supporting repeated production use on multiple parts without frequent roll changes during cutting or application workflows.

Key Edge Banding Details For Daily Work

• The 15/16 inch width, referenced in 15/16X.018, fits edging tasks on panels close to that thickness, so installers can trim flush with minimal waste and consistent coverage along cabinet or casework edges.
• The .018 inch thickness, specified in 15/16X.018, provides a relatively thin ABS profile that shapes easily at the edge while maintaining a defined transition line, which supports clean trimming and reduced edge bulk on finished components.
• The SAP description specifies 600FT, giving a continuous length well-suited to production runs or large projects, allowing long sequences of parts to be edged from a single roll for more efficient workflow planning.
• The manufacturer part number 716041-584 ties directly to Rehau, Inc., which helps shops reorder the same ABS edgebanding when matching prior installations or maintaining consistent edge appearance across multiple batches.
• The CP41088 LAC reference in the SAP description identifies this specific variant within Rehau ABS offerings, giving purchasing and production teams a clear code for aligning material selection with job specifications and internal inventory records.

Installing This 15/16 x .018 ABS Edgebanding

The SAP description 15/16X.018 CP41088 LAC 600FT indicates this Rehau ABS edge banding is sized for standard edgebanding application methods where a narrow band is wrapped along panel edges, then trimmed flush. The 15/16 inch width provides enough coverage to span the edge and a slight overhang, which supports accurate trimming whether the shop relies on manual tools or edgebanding machinery. The .018 inch thickness influences how the band behaves during trimming and scraping, as a thinner ABS layer tends to cut and finish with a defined, compact profile along the edge. With 600FT per roll identified, installers can set up extended runs on equipment or plan handheld application across many pieces, reducing changeovers as they move through cabinet or furniture edge sequences.

Using Rehau 716041-584 Edgebanding In Shop Work

Where This ABS Edge Banding Is Typically Applied

The product class Edge Banding and category Edgebanding confirm that Rehau ABS edgebanding 716041-584 is intended for covering exposed panel edges in woodworking and related fabrication. On cabinet boxes, the 15/16 inch width aligns with edging common panel dimensions so face edges can present a finished strip instead of exposed substrate. On shelving or furniture components, the thin .018 inch ABS profile allows edged parts to maintain their original proportions while adding a protective, visual finish to cut edges. Because the SAP description specifies a 600FT length, this roll format supports shop environments that edge multiple panels per day, allowing repetitive runs on production lines or batch jobs where consistent edge appearance across every piece is important to the final installation.

Why These Dimensions Matter For Repeatable Results

The 15/16X.018 designation in the SAP description gives both width and thickness, two measurements that strongly affect how the edgebanding behaves from cutting to final trimming. At roughly 15/16 inch wide, the banding overhangs most panel edges just enough for trimming tools or edgebanders to work cleanly, which promotes a uniform reveal without excessive material to remove. The .018 inch thickness keeps the ABS layer relatively thin, so it conforms closely to the edge and trims to a defined corner, supporting consistent alignment when panels join in cabinet assemblies. The CP41088 LAC code and manufacturer part number 716041-584 together create a clear identifier, helping fabricators tie setup notes, machine programs, or job standards to this specific ABS edge banding for repeat orders and matching replacement work.

Common Questions About Rehau ABS Edge Banding 716041-584

Select Rehau ABS Edgebanding 716041-584 For Edge Work

Rehau ABS edgebanding 716041-584 combines a 15/16 inch width, .018 inch thickness, and 600FT length in a single, clearly identified product for edge finishing tasks. The SAP description 15/16X.018 CP41088 LAC 600FT and manufacturer part number 716041-584 give purchasing and production teams reliable data when matching existing cabinetry or planning new runs. For shops wanting a defined ABS edge banding size tied to a specific Rehau, Inc. identifier, this edge banding aligns material selection with repeatable cabinet and furniture edge results.