Rehau ABS edgebanding 716041-585 15/16 x .018

Rehau ABS Edgebanding 716041-585 For Clean Edges

Rehau ABS edgebanding 716041-585 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut substrate is covered and protected. The 15/16 inch width spans standard panel thicknesses with margin, giving installers room to trim for a crisp, straight edge line. The .018 inch thickness keeps edges low-profile, which helps match typical furniture and cabinet aesthetics while avoiding a bulky feel. The CP41096 designation identifies the specific decor or pattern, so edge treatment visually coordinates with the corresponding panel surface in a project run. The LAC description ties this banding to a defined finish type, supporting consistent appearance across all edges on the same job. Supplied in a 600 foot length, this roll format supports longer production runs or multiple cabinet installations without frequent changeover, which keeps shop and site workflows moving efficiently.

Key Rehau ABS Edgebanding Details That Matter

• ABS edge banding construction provides a defined edging material that works as a dedicated solution for covering raw panel edges, supporting a uniform finish around cabinet or furniture components.
• 15/16 inch width allows the banding to span typical panel thicknesses with extra coverage, so edges can be trimmed back to a straight, flush finish along doors, drawer fronts, and casework.
• .018 inch thickness keeps the profile relatively thin, which helps finished edges sit close to the panel face and maintain a streamlined look along cabinet runs and furniture parts.
• CP41096 designation identifies a specific decor reference, helping match this edgebanding to a coordinating surface design for visually consistent components across a project.
• 600 foot roll length supports extended runs of edging work, reducing material changeovers during production and helping larger orders or multiple installations progress with fewer interruptions.

Edgebanding Size And Format For Straightforward Application

This Rehau ABS edgebanding uses a 15/16 inch width so the material overhangs standard panel thicknesses during application, giving users trimming room for a clean, flush result on cabinet parts. The .018 inch thickness supports a slim edge build, which helps maintain smooth transitions between the face material and the finished edge. With a 600 foot length, the roll format suits repetitive edging tasks in shops or on larger projects, where having continuous material supports consistent workflow and uniform appearance from the first panel to the last.

Using Rehau 716041-585 Edgebanding In Woodworking

Where This ABS Edge Banding Fits Best

Rehau ABS edgebanding 716041-585 is positioned within the edgebanding category, aligning it with edge finishing tasks on cabinets, furniture components, and other panel-based assemblies. The ABS construction makes it a defined edge banding solution rather than a general surfacing material, focusing its role on covering exposed cores along panel edges. The 15/16 inch width suits use on common board and panel sizes found in woodworking and casework, with intentional extra coverage that supports trimming along cabinet doors and shelf fronts. The CP41096 reference ties the banding to a particular decor, so it serves projects built around that specific surface design, helping shops and installers keep edges visually tied to matching panels throughout a build.

Details That Support Consistent, Repeatable Edge Results

The .018 inch thickness of this ABS edgebanding helps keep edge build modest, which is useful when consistent reveal and door or drawer clearances matter across a run of cabinets. Because the width is set at 15/16 inch, installers get a predictable amount of overhang to work with on each pass, aiding repeatable trimming results from part to part. The LAC description provides a defined finish type within the Rehau offering, giving users a stable reference when they need the same edge appearance on repeat orders or phased projects. Being supplied as a 600 foot roll keeps the material in one continuous length for extended edging sequences, which supports even color and pattern presentation along long cabinet banks or multiple similar pieces in a contract job.

Common Questions About Rehau ABS Edgebanding 716041-585

Select Rehau 716041-585 For Matching Edge Finishes

Choose Rehau ABS edgebanding 716041-585 when a 15/16 inch by .018 inch ABS edge banding is needed to coordinate with CP41096 decor surfaces. The defined width, thickness, and 600 foot length provide a consistent edging solution for cabinet and furniture projects sourced through Wurth Baer Supply.