Rehau ABS edgebanding 716041-597 is an ABS edge banding designed to finish exposed panel edges so cabinet and furniture projects present a clean, professional look. The 15/16 inch width covers typical panel thickness with a slight overhang, which allows trimming back to a flush, crisp edge for a precise appearance. The .018 inch thickness gives a slim profile that follows panel lines closely, helping parts nest well in tight reveals and modern layouts. The CP41033 designation identifies the specific décor and finish, so repeated orders match the same visual standard across jobs. A 600ft length supports longer production runs or multiple projects from a single roll, reducing changeovers during fabrication. As a Rehau, Inc. product, this ABS edgebanding aligns with common shop expectations for edge treatment materials in woodworking and cabinet building workflows.
This Rehau ABS edge banding uses a 15/16 inch width, giving coverage across the face and back of standard panels so installers can trim both sides after bonding for a uniform, square edge. The .018 inch thickness keeps the banding relatively thin, which works well with common edge trimmers and flush routers that are set up for light passes. The ABS construction defines it as a plastic edge banding suited to typical edgebanding stations in woodworking shops. With a 600ft roll length, technicians can set up once and run longer stretches of cabinet parts or casework without frequent material changes, helping keep the installation line moving.
This Rehau, Inc. ABS edge banding sits in the edge banding product class, aligning it with cabinet, furniture, and general woodworking use where raw panel edges need a finished treatment. The 15/16 inch width is sized for work on common sheet goods used in casework, doors, and shelves, allowing coverage over the full edge width with a manageable amount for trimming. Its CP41033 LAC identifier ties it to a specific décor in the Rehau line, which benefits projects that repeat the same color or pattern across multiple rooms or units. The 600ft length lets shops apply the same edge treatment through long runs of panels, reducing visual variation from job to job. Because it is ABS edgebanding, it integrates naturally into shop processes that already handle plastic edge materials.
The .018 inch thickness of this Rehau ABS edgebanding helps achieve a tight transition from banding to panel surface, which is important when doors and drawer fronts need to line up cleanly. The 15/16 inch width provides working tolerance during application, giving space to position the tape accurately and still have enough material for final trimming without exposing the substrate. The CP41033 finish code allows fabricators to reorder the exact same variant by part number 716041-597, keeping finish selections consistent across replacements, expansions, or phased projects. The 600ft roll length concentrates material under a single part number, simplifying inventory and helping shops stage sufficient edgebanding near edgebanders or bench setups. Together, these details support a workflow where panels receive a defined, repeatable edge treatment suited to professional cabinet and woodworking production.
Rehau 716041-597 edgebanding is 15/16 inch wide and .018 inch thick, which provides full edge coverage with a slim profile that trims flush for finished cabinet and furniture parts.
Rehau 716041-597 is ABS edgebanding, so it fits workflows set up for plastic edge materials in woodworking shops and typical cabinet manufacturing environments.
Rehau ABS edgebanding 716041-597 is supplied in a 600ft length, supporting longer production runs or multiple projects using the same CP41033 finish code.
The CP41033 LAC code identifies the specific décor and finish variant, helping shops repeat the same visual result and reorder matching Rehau ABS edgebanding by code.
The .018 inch thickness keeps the edge banding slim, allowing it to blend closely with the panel surface and work well with standard trimming tools in cabinet production.
This Rehau ABS edgebanding finishes raw panel edges, so cabinet and furniture assemblies present uniform, coded CP41033 surfaces along doors, cases, and shelves.
Rehau ABS edgebanding 716041-597 combines a 15/16 inch width, .018 inch thickness, and CP41033 LAC finish code to support consistent cabinet and furniture edge treatment. The 600ft length aligns with shop runs where many linear feet of ABS edgebanding are required. Using this defined Rehau part number helps keep finish choices and dimensions standardized from job to job, supporting a predictable workflow for edge finishing on panel-based projects.
Sold In: 1 Roll