Rehau ABS edgebanding 716041-601 is an ABS edge banding from Rehau, Inc. designed to finish exposed panel edges so cut board edges match the surface visually and functionally in woodworking projects. The product is classified as edge banding, so it is intended to cover raw panel cores and protect them in everyday use. The 15/16 inch width, referenced in the description 15/16X.018 CP40912 LAC 600FT, gives coverage for typical 3/4 inch panels with enough overhang for trimming, supporting a flush finished line after machining. The .018 inch thickness in the same description indicates a thin, manageable band that responds well to trimming, which matters when aiming for tight seams on doors, drawer fronts, and casework parts. The 600FT length described in the product data provides a continuous run suitable for production or larger jobs where consistent appearance across many parts is important.
The sizing in the SAP description 15/16X.018 CP40912 LAC 600FT defines how this Rehau ABS edge banding behaves during installation and finishing. The 15/16 inch width offers slight overhang on common panel thicknesses, so installers can apply the band and then trim back to a flush edge line using standard edge trimmers. The .018 inch thickness keeps the banding relatively light, which matters when working around inside curves or detailed edges where a heavier strip could be harder to finish. The 600FT length referenced provides enough material to run multiple cabinets or casework sections with the same appearance, supporting consistent results across a project.
This product is identified as Rehau ABS edgebanding, 716041-601, in the edge banding class, so it is intended for covering exposed edges on panels in woodworking and cabinet construction. The width of 15/16 inch in the description 15/16X.018 CP40912 LAC 600FT is suited to typical 3/4 inch engineered wood panels used in cabinets, shelving, and furniture components, allowing the banding to be applied to verticals, horizontals, and fronts before trimming. Because the product category is edgebanding and it is supplied in a long 600FT length, it aligns with use on runs of doors, drawer fronts, or case parts that repeat the same color or pattern across a room or group of fixtures. The ABS material named in the product title supports use in environments where thermoplastic edging is standard on laminated or coated boards.
The manufacturer part number 716041-601 links this Rehau ABS edgebanding to a specific color or pattern family, which matters when matching edges to panels that carry coordinated design codes. The SAP description 15/16X.018 CP40912 LAC 600FT spells out a 15/16 inch width that gives controlled overhang for flush trimming, supporting precise edge alignment after machining. The .018 inch thickness in the same description signals a thin profile that blends well at the corner, reducing noticeable edge build when scribing or aligning adjacent faces. The CP40912 designation within the description identifies a defined decor, so shops can reorder the same edge band when repeating a job or extending an existing installation. The 600FT length noted supports efficient production runs, since a single roll can serve many parts with identical edging.
Rehau 716041-601 is ABS edgebanding classified as edge banding, so it is used to finish and protect exposed panel edges on woodworking and cabinet components.
The Rehau ABS edgebanding 716041-601 has a described width of 15/16 inch, giving overhang on typical 3/4 inch panels for trimming to a flush finished edge.
This ABS edge banding has a thickness indicated as .018 inch in the description, which supports easy trimming and a low profile at the finished edge.
The product description lists 600FT, providing a long run of edgebanding suited to multiple cabinets or repeated parts in a project.
The CP40912 LAC portion of the description identifies a specific decor or finish system, which helps match this ABS edgebanding to panels using the same designation.
The 716041-601 ABS edgebanding is from Rehau, Inc., as listed in the product data, aligning it with Rehau edge banding systems.
The Rehau ABS edgebanding 716041-601 combines a 15/16 inch width, .018 inch thickness, and 600FT length, as shown in its description 15/16X.018 CP40912 LAC 600FT, to support efficient edging of common panel sizes. The ABS material and defined CP40912 LAC decor connect this edge banding to specific panel designs where consistent color or pattern along every exposed edge is important. For cabinet, furniture, or general woodworking projects built around coordinated surfaces, this Rehau edge banding provides a sized and coded option that aligns with those requirements.
Sold In: 1 Roll