Rehau ABS edgebanding 716041-615 identifies this Rehau, Inc. edge banding as a specific, repeatable option, which matters when matching material across jobs or reordering for future work on the same project line. The product class "Edge Banding" defines it as a trim for covering raw panel edges, helping protect exposed substrate while giving casework and furniture a finished, unified appearance along every visible edge. The ABS material callout in the name signals a plastic-based banding solution, supporting consistent machining behavior when applied with standard edgebanding processes. The dimension "15/16X.018" in the SAP description shows that this banding is approximately 15/16 inch wide by .018 inch thick, sized to cover typical panel thicknesses while limiting excess overhang that requires trimming. The 600FT length in the SAP description indicates one continuous run suited to production environments where long, uninterrupted edge runs reduce changeovers.
The 15/16X.018 dimension in the SAP description defines how this Rehau ABS edge banding presents to edgebanders, guiding pressure, heat, and trimming setups so machines can be dialed to a known width and thickness. The edge banding designation in the product class signals that this material is intended for application along panel edges, aligning with feed systems, pressure rollers, and trimming stations built for continuous strip work rather than sheet goods. The 600FT length specified in the SAP description provides a long, continuous roll, supporting extended runs on straight edges without frequent roll change, which benefits throughput on repetitive cabinet or component production. The ABS designation in the product name indicates a plastic edge material that engages routinely with common edgebanding workflows, helping maintain consistent cut, trim, and finish behavior from piece to piece.
The product class "Edge Banding" places this Rehau ABS edgebanding within typical cabinet, furniture, and casework environments where panel edges need to be covered, so it integrates logically anywhere laminated or raw board edges require a defined finish. The 15/16 inch width stated in the SAP description suits standard panel thickness coverage, which is especially useful on vertical cabinet sides, shelves, and exposed carcass edges where a narrow, controlled overhang trims back quickly. The .018 inch thickness for this ABS banding keeps the edge profile modest, which can be helpful when targeting crisp corners, minimizing lip at seams, and maintaining a subtle transition between panel face and edge. The manufacturer reference "Rehau, Inc." gives a clear source identifier, aligning this banding with other Rehau-specified items across a shop standard or architectural schedule.
The SAP description "15/16X.018 CP21014 LAC 600FT" provides an exact code that can be reused on cut lists, job folders, and purchasing systems, helping teams pull the same ABS edgebanding 15/16 x .018 every time that project specification is repeated. The manufacturer part number 716041-615 further tightens that identification, anchoring drawings, shop notes, and reorders to a single, specific Rehau 716041-615 edgeband rather than a generic alternative. The ABS callout in the name signals a defined material type, which supports predictable behavior at trimming and scraping stations, aiding in achieving a uniform edge appearance across long production sequences. The 600FT length noted in the description supports extended runs on automated or manual feed edgebanders, helping reduce mid-run stops that can interrupt alignment and edge quality. Together, these verified identifiers tie directly into setup, labeling, and material control, supporting consistent, repeatable edge treatment from first cabinet to last.
Rehau 716041-615 is classified as edge banding, so it is used to cover and finish panel edges in cabinetry, furniture, or casework projects where exposed board edges need a defined trim.
The product name identifies this as Rehau ABS edgebanding, indicating an ABS-based edge banding material that works with typical edgebanding processes in woodworking production.
The 15/16X.018 size in the SAP description indicates a banding about 15/16 inch wide and .018 inch thick, guiding machine setup and trimming expectations on standard panel edges.
The SAP description specifies 600FT, indicating a 600-foot length suited to longer production runs where reducing roll changes supports smoother workflow on repeated parts.
Manufacturer part number 716041-615 is Rehau's specific identifier for this ABS edge banding, letting drawings, job documents, and reorders all reference the same exact material.
The CP21014 LAC portion of the SAP description serves as part of the product code, helping distinguish this 15/16X.018 ABS edge banding from other Rehau options in inventory systems.
Rehau 716041-615 ABS edgebanding provides a clearly specified edge banding option, combining the 15/16X.018 size, CP21014 LAC code, and 600FT length into one repeatable choice for panel edges. Using this defined Rehau ABS edge banding helps align drawings, material pulls, and machine setups around a single, consistent edge treatment across cabinets, fixtures, or furniture runs. For projects built on Rehau references, this manufacturer part number and SAP description give a direct path from specification to finished edge.
Sold In: 1 Roll