Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding identifies this product as an ABS edge banding from Rehau, Inc., so it serves as a dedicated solution for covering raw panel edges where an ABS-based edge is specified. The 43x1mm size in the SAP description defines a strip 43mm high and 1mm thick, which suits jobs using panels in that edge height where a 1mm band is preferred for a defined edge profile. The 78997 matte detail in the SAP description designates a specific matte appearance, which supports projects calling for a low-sheen edge to coordinate with matte surfacing. The 100M detail indicates a 100-meter length, which gives installers enough linear material for longer runs or multiple cabinets without frequent changeover. The product class Edge Banding and category Edgebanding confirm its role as edge treatment for woodworking and casework applications where a dedicated edging material is required.
The 43x1mm dimension in the SAP description sets clear installation expectations, because a 43mm height targets panels whose edge height matches or is slightly under that measure, letting fabricators trim excess cleanly. The 1mm thickness detail directly affects how the edge behaves under trimming tools, supporting a defined edge that suits typical ABS-capable edgebanders and trimmers. The ABS material designation in the product name signals that this banding pairs with adhesive and machining setups commonly used for ABS, aligning it with workflows already built around ABS edging. The matte reference in the SAP description drives finish selection, so installers working with matte-faced boards can carry the same look through the edge zone without adding unwanted gloss.
The 43mm height specified in the SAP description positions this Rehau ABS edgebanding for panel edges that require coverage close to that size, giving enough material to cover the substrate and allow trimming for a tight finish along the face. The 1mm thickness noted in the SAP description shapes how the profile feels and looks, providing a defined band that can stand up to normal cabinet or furniture edge contact where a 1mm edge band is part of the design. The ABS material callout in the product name supports use on woodworking projects that already standardize on ABS edgebanding, aligning material type from edge to edge within the same project. The 78997 matte reference in the SAP description ties the edge appearance to a matte surface choice, so the transition from face material to edge will maintain a low-sheen look across doors, drawer fronts, or case edges.
The 100M length in the SAP description supports runs where many similar panels are edged, so shops can set up a line for this 43x1mm ABS band and work through long batches without switching to another roll. This length detail matters when scheduling work, because it allows planning edge operations around a known continuous supply for the specified thickness and height. The matte designation paired with the 78997 reference in the SAP description connects this roll to a consistent visual standard, which helps keep finished pieces visually uniform from the first panel to the last. The manufacturer part number 962092-021 links this exact combination of ABS material, 43x1mm size, matte appearance, and 100M length to Rehau, Inc., so repeat jobs can call out the same number whenever this specific edging is part of the specification.
Rehau ABS edgebanding 962092-021 is identified as ABS in the product name and SAP description, so it uses ABS plastic as the edge material for panel and cabinet edge treatment.
Rehau ABS edgebanding 43x1mm uses a 43mm height and 1mm thickness from the SAP description, fitting panel edges near that height while delivering a defined 1mm edge profile for trimming.
Rehau ABS edgebanding with 78997 matte in the SAP description provides a matte appearance, supporting projects that specify a low-sheen edge to coordinate with matte surfacing materials.
Rehau ABS edgebanding 962092-021 uses the 100M reference in the SAP description, indicating a 100-meter length suited to longer production runs or multiple cabinet and panel edge tasks.
Rehau ABS edgebanding 962092-021 is classified as Edge Banding in the Edgebanding category, aligning it with woodworking, cabinet, furniture, and general panel edge applications needing ABS edging.
Rehau ABS edgebanding uses manufacturer part 962092-021 to uniquely identify this 43x1mm, 100M, matte ABS edge banding, helping repeat orders match the same material and size specification.
Rehau ABS edgebanding 962092-021 from Rehau, Inc. combines ABS material, 43x1mm sizing, and a 78997 matte appearance into one defined edging option for panel work. The 100M length in the SAP description supports ongoing batches or repeated cabinet builds that rely on a consistent ABS edge profile. The Edge Banding product class positions this item for projects where raw panel edges need a dedicated ABS treatment to match matte faces. For woodworking and casework that call out these dimensions and finish, this specific Rehau ABS edgebanding gives a clear, repeatable choice.
Sold In: 1 Roll