Rehau ABS Edgebanding For Clean Panel Edges

Rehau ABS edgebanding defines this product as an ABS-based edge banding solution from Rehau, Inc., giving cabinet and fixture builders a dedicated material for finishing exposed panel edges with a consistent look along the run. The 43x1mm size in the SAP description 43X1MM ABS 140244 MATTE 100M identifies a band that is 43mm wide and 1mm thick, matching common panel thickness coverage needs where a single pass is expected to wrap the full edge. The material designation ABS in the description indicates an acrylonitrile butadiene styrene edge band, supporting a work process centered on machining and trimming plastic banding rather than veneer or PVC. The reference to MATTE in the SAP description signals a low-sheen surface appearance, supporting projects where installers want the edge to visually track with matte-faced boards or reduce glare under strong lighting. The 100M notation indicates a 100 meter length format, allowing longer cabinet or component runs to be banded from a single coil during shop production.

Key Rehau ABS Edgebanding Attributes In Use

• The ABS designation in the SAP description identifies a plastic edge banding material, so fabricators work with a consistent ABS substrate during cutting, applying, and trimming along panel edges.
• The 43mm width described in 43X1MM ABS 140244 MATTE 100M is sized to cover panel edges in one pass, which supports efficient workflow on standard cabinet and casework dimensions.
• The specified 1mm thickness in the same description gives a moderate edge profile, which helps installers produce a defined, durable-feeling edge after trimming and finishing operations.
• The MATTE term in the SAP description indicates a low-gloss face, which supports visual alignment with matte boards and helps reduce visible reflections on finished cabinet fronts.
• The 100M length stated in the SAP description provides a continuous coil format, which helps shops band multiple components or full kitchen runs without frequent material changes.

Edgeband Sizing Details For Practical Installation

The SAP description 43X1MM ABS 140244 MATTE 100M documents a 43mm by 1mm ABS edgeband, giving installers a defined width and thickness to match against their panel and tooling setup. The 43mm width provides coverage for typical carcass or door edges while leaving workable trim allowance, supporting clean routing or blade trimming without exposing the panel core. The 1mm thickness establishes a substantial yet manageable band for common edgebanding machines, letting operators balance edge durability with straightforward trimming and scraping. The ABS material basis identified in the description keeps the machining characteristics predictable across the entire coil, so cutters and scrapers interact with the same substrate from start to finish on a job.

How This Rehau Edgebanding Fits Woodworking Workflows

Using Rehau 962092-030 In Cabinet And Panel Runs

The manufacturer part number 962092-030 ties directly to this Rehau ABS edgebanding, allowing shops to specify or reorder the exact same edge band when repeating cabinet programs or matching earlier work. The category designation Edgebanding and product class Edge Banding place this item squarely in the role of finishing exposed edges on panels, doors, and casework components. With its 43mm width from the SAP description, this Rehau edge banding 140244 format spans edges on many standard panel thicknesses while leaving enough overhang to flush-trim for a clean line. The 100 meter length noted in the description supports a production approach where a single coil can service multiple cabinets, banks of drawers, or a room of fixtures without constant material changeover, supporting steady throughput.

Why Dimensions And Matte Finish Support Consistent Results

The 1mm thickness called out in 43X1MM ABS 140244 MATTE 100M gives this Rehau ABS edgebanding a solid edge presence that stands up well during trimming, so install crews can dial in their cutters without the band feeling overly fragile at the edge. The ABS material basis keeps the band homogeneous along its entire 100 meter length, which helps maintain consistent cutting pressure, scrape quality, and edge radius from the first piece to the last piece in a run. The MATTE designation on the surface appearance lets designers and builders target low-sheen cabinet faces or worktops while knowing the edge band will present a similar light reflection, supporting visual continuity across doors, drawer fronts, and side panels. Because the band is defined as 43mm wide, operators can standardize machine settings and trim allowances around that measurement, reducing time spent compensating for varied band widths on different projects.

Common Questions About Rehau ABS Edgebanding 962092-030

Select Rehau ABS Edgebanding 962092-030 For Defined Edges

The Rehau, Inc. ABS edgebanding with manufacturer part number 962092-030 and SAP description 43X1MM ABS 140244 MATTE 100M provides a 43mm by 1mm matte ABS band in a 100 meter length. That combination of material, size, and surface appearance lets woodworking shops and cabinet installers set up their machines around a known edgeband format and run consistent edges across panels, doors, and casework components in a single coil sequence.