Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding is an ABS-based edge banding from Rehau, Inc. that covers exposed board edges, so cabinet and furniture projects gain a finished appearance and protect raw substrates in day-to-day use. The 43x1mm size noted in the SAP description defines a moderate-width, 1mm-thick strip, which matches many common panel thicknesses and gives a substantial edge profile without being bulky for standard casework. The mirror gloss detail in the SAP description identifies a high-sheen surface, which visually aligns with glossy panel faces and helps create a consistent look across fronts and edges. The product sits in Wurth Baer Supply's Edgebanding category, so it is intended as a dedicated edging solution in woodworking workflows rather than a general trim. The ABS material reference in the SAP description points to a thermoplastic edge, supporting typical edgebanding machining such as trimming and flush routing on cabinet jobs.
The SAP description calls out 43x1mm, so the 43mm width provides coverage across common panel thicknesses plus slight overhang, giving trimmers material to work with during flush trimming. The 1mm thickness creates an edge that feels substantial compared to ultra-thin tapes, while still machining efficiently on typical edgebanders and handheld trimmers. The mirror gloss reference defines a smooth, reflective surface, which helps the edge line visually blend with high-gloss sheet goods in doors and casework. Because the product class is Edge Banding, the size and finish details combine to support standard edge-application steps found in cabinet shops and serious DIY setups that follow structured fabrication sequences.
The product name Rehau ABS Edgebanding, 967977-012 identifies it as an ABS edge banding from Rehau, Inc. used to cover exposed board edges in woodworking. Its place in Wurth Baer Supply's Edgebanding category positions it for cabinet, furniture, and similar panel-based projects where raw panel cores need a finished front. The SAP description defining 43x1mm means the strip is proportioned for many standard carcass and front dimensions, so it can run along vertical cabinet sides, horizontal shelves, or door edges without overwhelming the face. The mirror gloss callout aligns it with glossy decorative surfaces, letting fabricators use this banding around high-sheen kitchen or bath cabinetry where an unfinished edge would distract from the face materials.
The 43x1mm size in the SAP description supports predictable trimming because the width gives enough overhang across common panel thicknesses to allow clean routing back to the board face. That extra material at installation helps reduce visible gaps after trimming, which is critical when working on high-visibility cabinet fronts. The 1mm thickness contributes to an edge that handles everyday contact in kitchens or work areas while remaining workable during profiling or light easing on the edge. The mirror gloss designation defines how the light reflects along the edge, so when this banding runs next to mirror-like doors or panels, the transition from face to edge looks coordinated rather than matte against gloss. By tying the manufacturer part number 967977-012 to these specific dimensions and finish, shops can repeat the same appearance and sizing across multiple jobs or phases, maintaining consistent results over time.
Rehau ABS edgebanding 967977-012 is identified as ABS in the SAP description, so it uses an ABS thermoplastic edge that aligns with standard ABS edgebanding machining and finishing processes in cabinet shops.
The SAP description lists 43x1mm, meaning the banding is 43mm wide and 1mm thick, giving coverage and working thickness suited to many common cabinet and furniture panel dimensions.
The mirror gloss term in the SAP description indicates a high-sheen surface, so the edge visually aligns with glossy panels, helping maintain a continuous, reflective look across doors and casework.
This Rehau ABS edgebanding is categorized as Edge Banding, so it covers exposed board edges in cabinet and furniture assemblies, protecting raw cores while delivering a finished visual edge.
The 1mm thickness referenced in 43x1mm provides enough material for clean trimming and light profiling while remaining easy to process with typical edgebanders and handheld trimmers.
The manufacturer part number 967977-012 ties this exact ABS, size, and mirror gloss configuration back to Rehau, Inc., helping buyers match previous installations or standardize on a specific edge look.
This Rehau ABS edgebanding 967977-012 combines ABS material, a 43x1mm profile, and a mirror gloss finish, as detailed in the SAP description, giving cabinet and furniture builders a defined, repeatable edge option for glossy panel projects and ongoing shop standards.
Sold In: 1 Roll