Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding is an ABS edge banding that finishes exposed panel edges so cut board faces present a clean, protected edge on cabinets, fixtures, and other woodworking projects. The manufacturer part number 973835-004 identifies this specific Rehau, Inc. edgebanding, giving shops a consistent reference when matching materials across projects or reordering for repeat work. The SAP description 43X1.2MM ABS 76367 MG LE 100M defines the strip as 43 mm wide and 1.2 mm thick, which suits many common panel thicknesses where a substantial edge is preferred for impact resistance and a solid look. The ABS material construction allows machinists to process the edge banding using standard woodworking equipment suited to ABS edgebanding, supporting routine shop workflows. As part of the edge banding product class, this Rehau ABS edgebanding integrates naturally into casework builds wherever raw substrate edges need a finished band.
The SAP description 43X1.2MM ABS 76367 MG LE 100M defines the edgebanding dimensions, and that sizing guides how it moves through edgebanders and trimming stations. The 43 mm width gives operators enough material to center on typical panel thicknesses and still have a workable margin for top and bottom trimming passes. The 1.2 mm thickness sets how the band engages pressure rollers and cutters on edge banding equipment, influencing feed pressure settings and trim depth so edges come off the line flush and consistent. Because the material is identified as ABS, it fits into workflows designed around ABS edgebanding handling, from adhesive selection compatible with ABS surfaces to scraping and polishing steps tuned for this material type.
The Rehau ABS edgebanding with manufacturer part number 973835-004 is categorized as edge banding, positioning it for use on exposed edges of panels in cabinets, fixtures, and other woodworking assemblies. The 43 mm width stated in the 43X1.2MM ABS 76367 MG LE 100M description suits many standard panel builds where the band must span the board edge with a small overhang, so it fits well on common carcass sides, shelving, and door or drawer fronts. Being part of the Miscellaneous|Edgebanding category at Wurth Baer Supply, it slots into the typical hardware and surfacing selections a shop pulls from when finishing cut panel stock, allowing it to be specified alongside laminates, fasteners, and other casework components in one bill of materials.
The 1.2 mm thickness listed in the SAP description helps the Rehau ABS edgebanding present a more defined edge profile once trimmed, which can improve the feel along doors and panels compared with very thin tape. That thickness also provides a modest buffer during machining, so minor variations during trimming and scraping are less likely to expose the substrate. The ABS designation in 43X1.2MM ABS 76367 MG LE 100M means the material behaves in line with other ABS edge banding during cutting, routing, and finishing, so existing ABS-ready settings on edge banders and hand-finishing tools can be applied for consistent results. The 100M length detail supports continuous production runs, reducing interruptions on the edgebander and helping larger casework jobs move through the line with fewer material changes.
Rehau 973835-004 is an ABS edgebanding from Rehau, Inc., used to finish exposed panel edges so cabinet and woodworking projects present a clean, banded edge.
The SAP description 43X1.2MM ABS 76367 MG LE 100M indicates the edgebanding is 43 mm wide and 1.2 mm thick, which guides panel matching and edge trimming setup.
The edgebanding is identified as ABS in the 43X1.2MM ABS 76367 MG LE 100M description, so it is suited to machining and finishing processes designed for ABS edge banding.
The 1.2 mm thickness described in 43X1.2MM ABS 76367 MG LE 100M provides a more substantial edge, supporting a defined profile and tolerance for light trimming adjustments.
The 100M reference in the SAP description signals a 100-meter length designation, which supports longer production runs or multiple smaller jobs without frequent material changeovers.
This product is listed in the Miscellaneous|Edgebanding category and the Edge Banding product class, placing it among standard panel-edge finishing materials.
The Rehau ABS edgebanding with manufacturer part number 973835-004 combines a 43 mm width, 1.2 mm thickness, and ABS construction detailed in 43X1.2MM ABS 76367 MG LE 100M, so shops can align material selection with panel size, machining setup, and established ABS workflows on ongoing cabinet and woodworking jobs.
Sold In: 1 Roll