Rehau ABS edgebanding 973835-017 is an ABS edge banding from Rehau, Inc. that finishes exposed board edges so they present a uniform, usable surface instead of raw core. The ABS material described in the SAP description gives you a plastic edge solution suited to typical woodworking environments where a matching band is preferred to open substrate. The 43X1.2MM sizing called out in the SAP description identifies this as a 43 mm wide, 1.2 mm thick band, so it covers standard panel thicknesses in one pass while adding a substantial edge profile for machining and handling. The 100M notation in the SAP description indicates a long-run length that supports extended production runs or multiple cabinet jobs without constant changeover. As part of Wurth Baer Supply's edgebanding category, this product fits into a workflow where consistent edge coverage matters project after project.
The 43X1.2MM notation in the SAP description sets a clear edge size so installers can pair this Rehau ABS edgebanding with panels that benefit from roughly 43 mm coverage, allowing some overhang for trimming yet keeping waste controlled. The 1.2 mm thickness described there produces a more substantial edge than thin tapes, giving more material for flush trimming and corner easing on routing equipment. Because the 100M length is specified in the SAP description, shops can plan longer runs on edgebanding equipment without frequent coil changes, supporting steady feed and more predictable throughput. As an edge banding classified under Wurth Baer Supply's edgebanding product class, this item fits directly into workflows that rely on pre-dimensioned bands rather than shop-made strips.
The 43 mm width identified in the SAP description suits board edges where that coverage will span the full thickness of the panel with some overhang, so operators can trim both faces back to a clean line. This sizing lets shops align the banding to panel designs that call for a similar edge reveal, keeping visual lines consistent across a run of cabinets or fixtures. Because the product is categorized as edge banding by Wurth Baer Supply, it is intended specifically for closing off exposed panel edges so substrates do not remain visible in finished assemblies. The ABS material described delivers a uniform edge surface that can be machined consistently along its length, so multiple panels in a job respond similarly under the same trimming setup.
The combination of 43 mm width and 1.2 mm thickness documented in the SAP description gives installers a clear expectation of how the band will sit on the panel, which supports repeatable machine settings for trimming, scraping, and profiling. That defined thickness also means the edge feels more substantial in hand compared with very thin tape-style edges, which can be important where the finished piece will see regular contact along door or shelf fronts. The 100M roll length called out in the SAP description allows longer continuous feeds through edgebanders, which minimizes splice points along cabinet runs and supports smoother visual lines. Using a single Manufacturer Part # 973835-017 across a project standardizes the edge specification, so replacement panels or future additions can call out the same part for matching edge appearance and dimensions.
Rehau ABS edgebanding 973835-017 uses a 43 mm width and 1.2 mm thickness, giving coverage across the panel edge with enough material for trimming and clean finishing.
Rehau ABS edgebanding 973835-017 in a 100M length supports longer edgebanding runs, reducing coil changeovers and helping maintain a steady workflow on repetitive cabinet parts.
Rehau ABS edgebanding 973835-017 is an ABS edge banding product, used to finish exposed panel edges so substrates are covered by a consistent edge surface.
Rehau ABS edgebanding 973835-017 at 1.2 mm thickness offers a more substantial edge profile, giving more material for routing and easing while maintaining a solid edge feel.
Rehau ABS edgebanding 973835-017 uses the specific part number 973835-017, allowing shops to call out the same edge banding on drawings and reorders for consistent results.
Rehau ABS edgebanding 973835-017, listed as edge banding by Wurth Baer Supply, covers exposed panel edges so finished cabinets present uniform, closed edges on visible faces.
Rehau ABS edgebanding 973835-017, specified as 43X1.2MM ABS 76474 MG LE 100M in the SAP description, provides a clearly dimensioned edge band suited to covering exposed board edges. The defined 43 mm width and 1.2 mm thickness give installers predictable coverage and trimming behavior, while the 100M length supports extended production work. As part of Wurth Baer Supply's edgebanding offering, this product fits directly into professional cabinet and woodworking workflows where a consistent Rehau ABS edge band is required across panels. Use this part number when projects call for this exact ABS edgebanding size and material.
Sold In: 1 Roll