Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 973835-030 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so the core material is covered, which supports a more professional, unified look across cabinetry or fixtures. The SAP description "43X1.2MM ABS 140244 MG LE 100M" identifies this as a 43 mm wide, 1.2 mm thick ABS product, giving fabricators a defined edge thickness for consistent machining and visual balance between doors, drawer fronts, and finished panels. The 43 mm width provides coverage for common panel thicknesses plus overhang for trimming, which helps achieve a straight, flush edge after processing. This edgebanding is classified by Wurth Baer Supply under Edgebanding, so it fits directly into shop workflows where ABS edge treatment is required on furniture, casework, and other laminated components.
The SAP description 43X1.2MM ABS 140244 MG LE 100M defines a 43 mm width, which provides coverage beyond standard board thickness so installers can trim flush for clean lines along cabinet and furniture edges. The 1.2 mm thickness described in the code yields a more substantial edge profile than ultra-thin bandings, which helps create a defined edge appearance that visually matches thicker fronts or high-use panels. Because this product is classified as ABS edge banding, it fits into working methods where ABS edgeband is machined after application, supporting reliable trimming, scraping, and finishing passes on typical shop equipment.
This Rehau ABS edgebanding, identified by manufacturer part 973835-030 and SAP description 43X1.2MM ABS 140244 MG LE 100M, is positioned by Wurth Baer Supply as Edge Banding in the Edgebanding category, so it aligns with cabinet, furniture, and casework production that relies on ABS edge treatment. The 43 mm width reference gives enough coverage for typical panel thicknesses used in woodworking and laminated construction, allowing fabricators to center the band and trim both faces for a balanced reveal. Its 1.2 mm thickness referenced in the dimensional code supports use on visible edges where a stronger visual band is preferred, such as door and drawer fronts or exposed carcass sides.
The 43X1.2MM dimension reference on this ABS edge banding helps shops standardize their edgebanding setup across runs, because the width and thickness remain fixed from roll to roll under the 973835-030 part number. The 43 mm width allows edgebanders and trimmers to run with predictable overhang, so knife, router, or scraper stations can be set to consistent positions, which reduces rework when processing batches of similar parts. The 1.2 mm thickness creates an edge that is substantial enough to withstand normal machining passes after bonding, giving operators an easier time dialing in flush-trim and scraping without cutting through the band. Because this edgebanding is ABS-based as noted in the SAP description, it integrates with ABS-focused edgebanding lines, supporting stable processing temperatures and feed rates familiar to shops already working with ABS materials.
Rehau ABS edgebanding 973835-030 is an ABS edge banding from Rehau, Inc., used to cover exposed panel edges so the core material is concealed on cabinetry or furniture components.
The 43X1.2MM reference indicates the edgebanding is 43 mm wide and 1.2 mm thick, giving enough material for trimming to a flush, solid-looking edge profile on finished panels.
The 1.2 mm thickness provides a more pronounced edge band, which supports a robust visual edge and allows standard trimming and scraping without easily cutting through.
The ABS designation confirms the banding is made from ABS thermoplastic, so it suits shops already set up for ABS edgebanding processes and compatible adhesives.
Part number 973835-030 uniquely identifies this Rehau ABS edgebanding, helping shops reorder the same width, thickness, and coded series for consistent results across jobs.
The 100M reference in the SAP description signifies a 100 meter length designation, supporting project planning when edging multiple components in the same material run.
Rehau ABS edgebanding 973835-030, described as 43X1.2MM ABS 140244 MG LE 100M and offered by Wurth Baer Supply in the Edgebanding category, provides a clearly defined width and thickness for repeatable panel edge work. The 43 mm by 1.2 mm ABS format supports consistent trimming setups and a substantial finished edge, which benefits cabinetry, furniture, and casework built around ABS edge treatments. For projects where matching Rehau ABS banding by part number is important, selecting 973835-030 lets shops align new work with established material choices.
Sold In: 1 Roll