Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding identified as 973835-092 provides an ABS edge banding solution that finishes exposed panel edges, so cabinet and casework projects gain a defined edge treatment that matches engineered panels in a controlled way. The SAP description "43X1.2MM ABS 140809 MG LE 100M" defines this as ABS material in a 43 mm width and 1.2 mm thickness, which gives installers a substantial edge profile that machines cleanly during trimming on standard edgebanders. The 43 mm width provides coverage for typical panel thickness ranges used in cabinetry and fixtures, which matters when aligning banding flush during straight runs and corners. The 1.2 mm thickness supports a more solid edge detail than thin tape-style banding, which is useful where edges experience contact in daily use. The Rehau, Inc. branding ties this edgebanding to a dedicated edge banding product class, aligning it with common shop workflows that rely on consistent ABS formulations.
The SAP description "43X1.2MM ABS 140809 MG LE 100M" defines a 43 mm wide, 1.2 mm thick ABS edgebanding, which fits common straight-line and contour edgebanders that are set for 1.2 mm material, simplifying machine calibration. The 43 mm width provides coverage for many panel thicknesses used in cabinetry and casework, so edge overhang can be trimmed back to a clean line after bonding. The ABS material designation aligns this roll with standard ABS gluing and trimming behavior, which matters for shops that tune feed speed, temperature, and knife geometry for ABS edge banding.
The product name "Rehau ABS Edgebanding, 973835-092" and product class Edge Banding place this roll in edgebanding operations for panel-based construction, so it serves on cabinet sides, shelves, doors, and partitions using engineered boards. The 43 mm width specified in the SAP description gives enough material to cover panel thicknesses commonly seen in cabinetry while leaving trim allowance, which supports a clean final edge on vertical and horizontal members. The 1.2 mm thickness described in the SAP detail provides a more substantial edge profile compared to very thin banding, which suits edges that see regular handling, such as cabinet doors, drawer fronts, and accessible shelving. The 100M length described in the SAP string supports runs across multiple parts from the same roll, which helps maintain edge appearance continuity around a bank of cabinets or across repeated casework components.
The ABS designation in the SAP description means the edgebanding uses ABS material, giving shops a consistent substrate when dialing in glue temperature, feed speed, and trimming settings for ABS edgebanding for cabinetry. The defined 43 mm width helps operators position panels on edgebanders with predictable overhang on both faces, reducing adjustment time between similar panel thicknesses and supporting steady throughput. The 1.2 mm thickness supports a solid-feeling edge that responds well to standard top and bottom trimming cutters, which helps maintain straight, chip-free edges over long runs. The 100M length in the SAP description reduces the number of roll changes on edgebanding lines, which supports continuous processing of panel sets and helps keep color and surface character consistent from part to part. The manufacturer part number 973835-092 identifies this exact configuration within the Rehau ABS edgebanding range, which matters when repeating a specification on future jobs or aligning this roll with project documentation.
The SAP description states 43X1.2MM ABS, meaning the edgebanding is 43 mm wide and 1.2 mm thick, which guides edgebander setup, trimming allowance, and panel coverage expectations.
The SAP description lists ABS, so this edgebanding uses ABS material, aligning with edgebanding processes that are tuned for ABS gluing, trimming, and finishing behavior in cabinet shops.
The SAP description specifies 100M, indicating a 100 meter length that supports extended edgebanding runs across multiple panels before a roll change is needed.
The 1.2 mm thickness noted in the SAP description provides a more substantial edge profile than thin tape, supporting solid-feeling edges on cabinet doors, drawer fronts, and shelving.
The product class Edge Banding and ABS material make this roll suited to finishing exposed edges on panel-based cabinetry, casework, and similar woodworking projects using engineered boards.
The manufacturer part number 973835-092 uniquely identifies this Rehau ABS edgebanding configuration, helping shops repeat the same width, thickness, and material on future jobs.
The Rehau ABS edgebanding identified by manufacturer part number 973835-092 and SAP description "43X1.2MM ABS 140809 MG LE 100M" offers a defined 43 mm width, 1.2 mm thickness, and ABS material for cabinet and casework edge treatment. This combination lets shops align edgebander parameters to a known ABS profile, maintain consistent edge appearance across 100 meters of production, and document the exact edge banding used through the part number reference on project records.
Sold In: 1 Roll