Rehau ABS edgebanding 973836-017 identifies this product as an ABS edge banding from Rehau, Inc., so it is suited to finishing exposed edges on suitable panels in woodworking projects. The SAP description 43X1.2MM ABS 2228W MG LE 100M shows that the banding is approximately 43 mm wide and 1.2 mm thick, giving enough coverage to cap standard panel edges while leaving material to trim for a flush finish. The 100M reference indicates a long continuous length, allowing extended runs on projects without frequent material changes, which helps maintain consistent appearance along cabinet or furniture edges.
The ABS material designation in the SAP description indicates a thermoplastic banding, supporting edge finishing where an ABS strip is specified in the build. The 2228W MG LE coding distinguishes this specific color and surface reference within the Rehau line, helping match this edgebanding to panels using the same decor code in shop drawings or cut lists.
The SAP description 43X1.2MM ABS 2228W MG LE 100M confirms an approximate 43 mm width, giving installers enough banding to cover common panel thicknesses while leaving excess for trimming on both sides. The 1.2 mm thickness referenced in the same description provides a substantial edging profile that can be worked with common edgebanding equipment, supporting clean machining of the edge without being overly delicate in handling. The 100M length noted in the description supplies extended footage in a single roll, which supports workflow on runs of cabinet boxes or furniture parts where uninterrupted edging is preferred for an even appearance.
The product class Edge Banding and category listing as Edgebanding identify this Rehau, Inc. item as suited for finishing exposed panel edges in woodworking applications. The ABS material called out in the SAP description 43X1.2MM ABS 2228W MG LE 100M ties it to projects where an ABS edgebanding is specified, such as cabinetry, casework, or furniture panels that require a coordinated edge. The approximate 43 mm width from the SAP description allows this banding to cover standard panel thicknesses with margin for trimming, which works well on vertical cabinet sides, shelving edges, and similar components. The color and finish coding 2228W MG LE within the SAP description provides a specific decor reference, supporting projects that rely on matching this edge banding to corresponding panel surfaces identified with the same code in project documents.
The manufacturer part number 973836-017 and the web description tag WBSC - 1432 - RU973836-017 give a precise way to specify this exact edge banding variant when ordering or documenting jobs. That clear identification supports repeat ordering for follow-up work or repairs where the same Rehau ABS edgebanding 973836-017 must be used to maintain visual continuity on existing installations, helping shops align new parts with earlier runs.
The SAP description 43X1.2MM ABS 2228W MG LE 100M defines both width and thickness, giving installers predictable material dimensions for edgebanding equipment settings, trimming allowances, and feed setups. With an approximate 43 mm width, there is enough coverage to center the band on the panel edge and still have material to trim back to flush, which supports uniform results along long cabinet or furniture edges. The 1.2 mm thickness means the banding provides a defined edge profile that responds consistently during trimming and flush routing, which helps produce a tidy corner where the face meets the edge.
The 100M length indicated by the SAP description allows extended edging from a single roll, supporting consistent process parameters across many parts without changing material mid-run. Because the product is identified as ABS within the same description, it behaves within the expectations of ABS edgebanding in shop workflows, which helps standardize settings when switching between jobs that also use ABS edge treatment. The coding 2228W MG LE groups color and finish information for this particular Rehau ABS edgebanding, so when that code appears in a cut list or plan, this exact item can be selected again, supporting repeatable visual matches from project to project.
Rehau ABS edgebanding 973836-017 uses 43X1.2MM in the SAP description to indicate an approximate 43 mm width and 1.2 mm thickness, guiding edge coverage expectations and trimming allowances.
Rehau ABS edgebanding 973836-017 lists 100M in the SAP description, providing a long continuous length that supports edging multiple panels while maintaining consistent appearance along runs.
Rehau ABS edgebanding 973836-017 is identified as ABS in the SAP description, so it aligns with jobs that call for ABS edge banding on cabinetry or panel-based furniture.
Rehau ABS edgebanding 973836-017 uses a 1.2 mm thickness, as stated in the SAP description, giving a defined edge profile that responds predictably to trimming and flush-routing operations.
Rehau ABS edgebanding 973836-017 uses the 2228W MG LE code in the SAP description to distinguish its specific color and finish reference within the Rehau ABS line.
Rehau ABS edgebanding 973836-017 uses that manufacturer part number to uniquely identify this variant, supporting accurate reordering and documentation for ongoing or repeat projects.
Rehau ABS edgebanding 973836-017, defined in the SAP description as 43X1.2MM ABS 2228W MG LE 100M, provides specific dimensions, material, and decor coding that align with projects calling for this exact edge treatment. The combination of approximate 43 mm width, 1.2 mm thickness, and 100M length supports efficient edging of cabinet or furniture panels while maintaining consistent appearance across parts. When panel or project specifications identify 2228W MG LE or manufacturer part number 973836-017, selecting this edgebanding allows the edge treatment to follow those documented requirements.
Sold In: 1 Roll