Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bottom mount waste pullout gives you a built-in way to move a floor-standing trash can into the cabinet and free up kitchen floor space. The Rev-A-Shelf waste pullout in this configuration is a single bin waste pullout with a white metal frame and one white waste container. It is designed as a bottom mount trash pullout for a 12 inch cabinet with a 9-1/2 inch opening. The unit uses a 3-piece zinc plated 3/4 extension ball-bearing slide system, so the trash pull out glides on a supported track. Rev-A-Shelf includes the frame, slides, one 30 qt. waste container, and mounting hardware. The unit uses standard 12 gallon trash bags, and the installed assembly can be removed for easier cleaning.
Key specs to confirm: This cabinet waste container is a bottom mount waste pullout designed for a 12 inch cabinet with a 9-1/2 inch opening. The product data identifies a white frame and one 30 qt. waste bin, while the product name also references a 32 quart standard bin description, so buyers should confirm the exact bin size shown for the current SKU before ordering. The slide system is a 3-piece zinc plated 3/4 extension ball-bearing type, and the whole unit holds 100 lbs. Confirm your cabinet opening, interior depth, door clearance, and whether you want a door-mounted setup. Safety, compliance, and any unlisted dimensional details should be confirmed with the manufacturer or technical documentation.
What's included: One white waste container, one metal frame, one pair of slides, and mounting hardware are included.
What to verify before ordering: Check cabinet width, clear opening, interior depth, and any hinge or door obstructions. Confirm whether your installation needs the optional door-mount brackets or a lid. Verify the listed bin capacity for this SKU if your project depends on a specific quart size.
A kitchen trash pullout like this is a practical fit for remodels, cabinet upgrades, and replacement projects where the goal is to move waste off the floor and into a dedicated cabinet bay. If you have been using a freestanding can beside the base cabinets, a bottom mount waste pullout creates a more contained layout and uses the cabinet interior instead of open floor area.
This Rev-A-Shelf waste pullout is built for buyers who need a narrow cabinet application. The verified fit guidance says it is designed for a 12 inch cabinet with a 9-1/2 inch opening, which makes it relevant when wider double-bin systems will not fit. A professional installer can use that information early in planning to avoid ordering a wider frame than the cabinet can accept. A serious DIY buyer can also use it as a quick first filter before measuring depth and checking for hinge or door interference.
The included white bin and metal frame help simplify the purchase because the main working parts are already in the carton. The 3-piece zinc plated 3/4 extension ball-bearing slide system supports the pullout action, and the simple 4 screw installation is useful when the job calls for a direct bottom-mount setup rather than a more involved assembly. Because the unit can be removed after installation, cleaning around the base of the cabinet is more manageable than with a fixed floor can.
This single bin waste pullout also suits kitchens where one waste stream is enough and where the buyer wants common bag fit. The verified product data states that it uses standard 12 gallon trash bags, so replacement bags are easy to source. If your project requires a door-mounted trash pull out, note that door-mount brackets are optional and sold separately. If you want a lid, that is also a separate add-on. Buyers should confirm cabinet depth and the exact bin size listed for the SKU, since the product data includes both 30 qt. and 32 qt. references.
When comparing a bottom mount trash pullout, the most useful differences are usually fit, included parts, slide style, finish, and whether door-mount hardware is included or optional. This Rev-A-Shelf cabinet waste container gives buyers several verified details that make comparison easier. It is a bottom-mounted unit, it includes one white bin, it uses a metal frame, and it runs on a 3/4 extension ball-bearing slide system.
That matters because some buyers are replacing an older pullout and need to know whether the new unit is a complete basic kit or just a frame. Here, the verified included components are one waste container, one metal frame, one pair of slides, and mounting hardware. That allows an installer to plan around the actual contents instead of assuming extra parts are included. The optional door-mount brackets are clearly separate, which helps avoid missed parts on site.
Another useful comparison point is service access. The product data states that the unit can be removed once installed for easy cleaning. For a kitchen cabinet accessory that handles waste, that maintenance detail can matter as much as the slide type. The verified 100 lb. whole-unit capacity is also a concrete figure buyers can use when reviewing pullout construction, but if your application has unusual loading or code-related requirements, those details should still be checked in manufacturer documentation.
For buyers who want a white waste pullout in a narrow cabinet, this model offers a clear set of knowns: bottom mount format, white frame option, one included bin, standard 12 gallon bag use, and a simple install path. The key to a good purchase is confirming cabinet fit and whether optional accessories are needed for your door style and workflow.
This Rev-A-Shelf trash pull out is designed for a 12 inch cabinet with a 9-1/2 inch opening. Confirm your actual clear opening and interior depth before ordering.
This cabinet waste container includes one white waste bin, one metal frame, one pair of slides, and mounting hardware.
This bottom mount waste pullout does not require the optional door-mount brackets for operation, but the door-mount kit is available separately if your install calls for it.
This kitchen trash pullout uses a 3-piece zinc plated 3/4 extension ball-bearing slide system.
This single bin waste pullout uses standard 12 gallon trash bags.
This Rev-A-Shelf waste pullout can be removed after installation for easier cleaning inside the cabinet.
This bottom mount trash pullout has a verified whole-unit capacity of 100 lbs.
This product listing includes both 30 qt. and 32 qt. references. Confirm the exact bin size for this SKU before ordering if capacity is critical.
This white waste pullout should be checked for cabinet width, 9-1/2 inch opening clearance, interior depth, hinge clearance, and any need for optional door-mount hardware. Follow manufacturer installation guidance and local building requirements where applicable.
Bottom mount waste pullout is a practical choice when you want one built-in bin, a narrow cabinet fit, and a straightforward install. This Rev-A-Shelf kit includes the frame, slides, one white waste container, and mounting hardware, with optional door-mount brackets available separately. Before purchase, confirm your 12 inch cabinet application, 9-1/2 inch opening, interior depth, and whether your job depends on a specific 30 qt. or 32 qt. bin listing. Those checks help you order the correct cabinet waste container the first time.
Sold In: 1 Each