Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
bottom mount waste pullout from Rev-A-Shelf gives kitchen cabinets a built-in place for everyday trash handling. This Rev-A-Shelf waste pullout is a bottom-mounted trash pullout with one white waste container, a metal frame, a pair of slides, and mounting hardware. It is designed for a 12 inch cabinet with a 9-1/2 inch opening, making it useful when you want to replace a floor-standing can and free up cabinet-adjacent floor space. The single bin waste pullout uses a 3-piece zinc plated 3/4 extension ball-bearing slide system for steady movement. The white waste pullout can also be paired with an optional door mount kit and optional lids, but those accessories are sold separately and are not required for operation.
Key specs to confirm: This cabinet waste container is a bottom mount trash pullout designed for a 12 inch cabinet with a 9-1/2 inch opening. The product data identifies a white 30 qt. waste container, while the product name and SAP description reference a 32 quart format, so buyers should confirm the exact bin size in current technical documentation before ordering. The unit uses a 3/4 extension ball-bearing slide system and the whole unit holds 100 lbs. Confirm cabinet interior width, opening clearance, base mounting surface, and whether your installation needs the optional door mount kit. If any additional safety, compliance, or dimensional details are required for your project, confirm them with the manufacturer or technical documentation.
What's included: Verified included items are one white waste container, one metal frame, one pair of slides, and mounting hardware.
What to verify before ordering: Check your cabinet width and clear opening, confirm the exact bin capacity you need, verify slide travel meets your access preference, and confirm whether you want the cabinet door attached with the separately sold door mount kit. Also verify any lid requirement, since lids are optional and sold separately.
A single bin waste pullout fits buyers who want a direct replacement for a freestanding kitchen trash can without moving to a larger multi-bin setup. In many kitchens, the main issue is wasted floor space near the prep area or sink base. A cabinet-installed trash pullout moves that task inside the cabinet and keeps the container in a fixed location. This Rev-A-Shelf waste pullout is built for that kind of upgrade. It uses a bottom-mount format, includes the frame and bin, and installs with a simple 4 screw installation.
For installers, the practical value is straightforward. The unit is designed for a 12 inch cabinet with a 9-1/2 inch opening, so the fit target is clearly defined in the product data. The 3-piece zinc plated 3/4 extension ball-bearing slide system supports regular pullout use, and the frame can be removed after installation for cleaning. That matters in kitchens where debris and bag drips can collect around the cabinet bottom.
For serious DIY buyers, this kitchen trash pullout can be a cleaner way to handle trash than leaving a can beside the cabinet. The included waste container uses standard 12 gallon trash bags, which helps avoid odd bag sizing. If you want the cabinet door to move with the pullout, an optional door mount kit is available, but it is not required for operation. If your project also needs a lid, that should be selected separately and matched to the confirmed container size.
Because the product data shows a possible difference between 30 qt. and 32 qt. references, buyers should confirm the exact current bin capacity before ordering accessories or planning a replacement bin strategy. That extra check helps prevent mismatch issues during install.
When comparing a trash pullout, buyers often focus on three areas: fit, slide construction, and day-to-day upkeep. This bottom mount waste pullout gives verified details in each area. Fit starts with the stated cabinet target of a 12 inch cabinet and a 9-1/2 inch opening. That gives a concrete starting point for cabinet planning. Install method is also clear because the unit uses bottom mounting and a 4 screw installation.
Slide construction matters because a cabinet waste container is opened often. This unit uses a 3/4 extension ball-bearing slide system with zinc plated components. That type of slide setup is useful when buyers want guided movement from a metal-frame pullout instead of a loose bin on the cabinet floor. The heavy gauge powder coated metal wire construction adds another practical point for buyers who want a fixed frame rather than a plastic-only holder.
Upkeep is another useful comparison point. Some cabinet accessories are awkward to clean once installed. This Rev-A-Shelf waste pullout can be removed after installation for easier cleaning, which supports routine maintenance in kitchens with high daily use. The included white bin and the use of standard 12 gallon trash bags also keep replacement and daily operation simple.
If you are comparing similar cabinet waste container options, verify the same basics each time: cabinet opening, mounting surface, whether a door mount kit is needed, included bin count, and any accessory compatibility. Those checks matter more than broad marketing claims because they determine whether the pullout will fit and work as expected in your cabinet layout.
This trash pullout is designed for a 12 inch cabinet with a 9-1/2 inch opening. Follow manufacturer installation guidance and local building requirements where applicable.
The Rev-A-Shelf waste pullout includes one white waste container, one metal frame, one pair of slides, and mounting hardware.
This cabinet waste container does not require door mounting for operation. A door mount kit is optional and sold separately.
This kitchen trash pullout uses a 3-piece zinc plated 3/4 extension ball-bearing slide system.
This single bin waste pullout uses standard 12 gallon trash bags.
The Rev-A-Shelf pullout can be removed once installed for easier cleaning around the cabinet base.
The whole unit holds 100 lbs. according to the verified product data.
The product data shows both 30 qt. and 32 qt. references. Buyers should confirm the exact current bin size before ordering accessories.
This white waste pullout does not list lids as included. Optional lids are available separately for certain bin sizes.
This bottom mount waste pullout requires cabinet width, opening clearance, and base mounting space to be confirmed before purchase. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf waste pullout is a practical choice when you need a bottom-mounted cabinet waste container with a included bin, slide hardware, and a defined cabinet fit target. The package includes one white waste container, one metal frame, one pair of slides, and mounting hardware. Before purchase, confirm your cabinet is a 12 inch cabinet with a 9-1/2 inch opening, verify whether you need the optional door mount kit or lid, and double-check the exact current bin capacity listed for your order.
Sold In: 1 Pallet