
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
This is a 1/2 inch aluminum hanging file rail from Custom Plastics, sold in a 98.425 inch (approximately 98-7/16 inch) length for shops and builders who cut rails to fit specific drawer dimensions. It is the rail stock itself — the profile that hanging folder hooks ride on — and requires matching 1/2 inch hanging rail brackets to make a working file drawer.
Long-stock rails like this one suit builders who are converting multiple drawer boxes into file drawers or building custom casework from scratch. Rather than ordering pre-cut pairs for each drawer, you measure the interior width of each box, cut two lengths of rail to that dimension, and mount them on the appropriate brackets. The 98-plus-inch run is long enough to yield rails for several standard-depth drawers from a single piece, keeping cut-off waste low on production runs.
This rail handles letter-size hanging folders. Legal folders are wider and require a legal-size rail profile — the two are not interchangeable, so confirm the folder size before ordering.
The rail profile is white and sized at 1/2 inch height. Hanging rail brackets are height-matched: 1/2 inch brackets are required to carry this rail correctly. Top-fastening, side-mount, and cross-bar-mount bracket styles are available in Custom Plastics' Pendaflex and Kineflex lines; choose the mounting style that suits your drawer box construction. The rail is sold as a single 98.425 inch length — not as a cut pair or a complete kit. Plan on two cut lengths per drawer plus the appropriate brackets to complete each file drawer installation.
Cabinet shops building office desks, lateral file bases, or multi-drawer credenzas in quantity get the most from this format. Rather than managing per-drawer kit inventory, a shop can stock a few lengths of rail stock and cut to fit on the bench. Designers spec'ing custom millwork with non-standard drawer depths benefit from the same flexibility — the rail cuts cleanly to any dimension the project requires. Home builders or renovation contractors converting a single deep kitchen or closet drawer into a filing drawer can do the same math: measure the interior, cut two pieces, add brackets.
Just the rail. Brackets are required to mount it in the drawer and are sold separately. Pick 1/2 inch brackets in the mounting style your drawer box calls for.
No — this is a 1/2 inch rail for letter-size folders. Legal folders are wider and need a different rail profile.
That depends on your drawer's interior width. A 98.425 inch length divided by a typical 14 to 18 inch interior width yields five to seven cuts per rail — so two to three complete drawer pairs per length, with offcuts depending on width.
A 1/2 inch bracket — the bracket height must match the rail height so the rail seats correctly and folder hooks clear the drawer bottom.
By the piece: one 98.425 inch rail per unit. You will need two cuts per drawer plus brackets to complete the installation.
The 98.425 inch white hanging file rail gives a production shop or custom builder the stock to fit file drawers into any project without being locked into pre-cut lengths — measure, cut, mount, and move on.
Sold In: 1 Each