Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCTM top-mount waste pullout fits two 35-quart bins side by side in a single base cabinet, rolling both forward on a soft-close slide system so trash and recycling stay behind closed doors.
A single-bin pullout forces a choice between trash and recycling. This unit skips that trade-off by housing two 35-quart bins on one carriage, both rolling out in a single motion. Opening the cabinet door pulls everything forward at once, so neither bin requires a separate reach or a separate door. For a kitchen where trash and recycling run in parallel, the double-bin layout handles the daily routine without extra steps.
The top-mount configuration positions the slide hardware at the top of the unit rather than beneath the bins, which leaves the cabinet floor unobstructed. That matters in cabinets with plumbing cutouts or uneven floor surfaces, where a bottom-mount unit would need additional clearance management.
The carriage is maple, a hardwood that resists racking under the repeated pull-and-push of daily use. Maple's tight grain and light color work naturally in painted and natural wood cabinet interiors without standing out. The soft-close slide mechanism is the detail that makes a loaded double-bin unit practical over time: a carriage carrying two full 35-quart bins develops real momentum on the return, and the damping brings it back under control so the hardware and the cabinet face stay intact through years of use.
This pullout is sized for an 18-inch base cabinet and designed for kitchens where trash and a second waste stream need their own dedicated space. Cabinet shops and custom kitchen builders will recognize the pallet pack of 25 as a volume configuration for project-scale sourcing. The door-mount bracket ties the carriage to the cabinet door so operation is automatic: open the door, the bins come forward. For a single-bin application or a narrower opening, other configurations in the 4WCTM series are available. The bins included are Rev-A-Shelf standard bins; replacement bins and lids are sold separately.
This unit is built for an 18-inch base cabinet. Measure the clear interior opening before ordering to confirm fit. Minimum cabinet opening details should be verified against the product spec sheet for face-frame and frameless installations.
Two 35-quart bins are included with the carriage. Replacement bins and lids are sold separately.
A door-mount bracket attaches the carriage to the inside of the cabinet door so the pullout extends automatically when the door opens. This eliminates a separate pull on the carriage.
The 25-unit pallet pack is a volume configuration for cabinet shops, dealers, and builders fitting out multiple kitchens. Single-unit quantities may be available in other SKUs in the 4WCTM series.
On a top-mount unit, the slide hardware rides at the top of the carriage, leaving the cabinet floor clear. A bottom-mount unit attaches the slides to the cabinet floor. Top-mount is a common choice when the cabinet floor has plumbing or is uneven.
Two full-size bins, soft-close return, a solid maple carriage, and a pallet pack format make this pullout a practical double-waste solution for cabinet shops outfitting multiple kitchens at a time.
Sold In: 1 Pallet