Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice clip-on cam mounting plate is a hinge mounting plate designed to pair with compatible Salice hinge arms in cabinet constructions. This wing mounting plate establishes the hinge interface on the cabinet, so doors align correctly and operate smoothly in everyday use.
The plate is part of the hinge mounting plates class, so it serves as the structural link between the cabinet and Salice hinge hardware. By choosing a dedicated hinge mounting plate, installers get a defined reference surface for setting hinge positions on cabinet sides or other mounting surfaces.
This Salice America plate uses a clip-on cam design, which allows hinge arms using the matching clip-on system to fasten to the plate. That cam interface supports precise positioning of the hinge arm on the plate, helping maintain consistent reveals and door gaps across a run of cabinets.
The manufacturer part number BAVGL09F/16 identifies this exact plate style, which supports repeat ordering when matching existing Salice hinge layouts in shops or on service calls.
This Salice wing mounting plate uses a 0mm plate height, so the hinge arm sits close to the cabinet mounting surface, which is useful when building frameless or specific overlay conditions that expect a zero-height plate.
Because the mounting plate defines the hinge pivot position relative to the cabinet, the 0mm designation helps installers repeat the same geometry across multiple openings, supporting consistent door overlay or inset relationships.
The plate uses a cam adjustable connection with the hinge arm, meaning installers can fine-tune the hinge position at the plate instead of relocating the entire plate position, which saves time during final alignment.
By selecting a 0mm cam adjustable plate from the same hinge system, shops standardize their drilling and layout patterns, which supports efficient production and straightforward hinge replacement when needed.
Salice clip-on cam mounting plate with wing form fits into cabinet hinge assemblies where a Salice hinge arm connects to a cabinet side or panel. The wing configuration provides extended mounting ears, which are suited to distributing load across a wider area of the cabinet panel.
As a hinge base plate, this part belongs at the cabinet-side interface of the hinge set, while the hinge arm attaches to the door. In this arrangement, the plate defines the cabinet reference line for the door movement path, supporting predictable clearance to adjacent doors or panels.
The 0mm plate height is chosen for applications where the design hinge geometry calls for a zero-offset base plate. In practice, that height keeps the hinge arm closer to the cabinet surface, which is beneficial when working with overlay measurements or cup drilling positions that expect a flat baseline.
In shops already using Salice America hinge systems, this specific mounting plate part number BAVGL09F/16 can be matched to existing jobs or drawings, helping maintain consistent hinge geometry across replacement, repair, or expansion projects within the same cabinet line.
The clip-on cam adjustable mounting plate uses a cam mechanism to position the hinge arm, so installers can adjust alignment at the plate interface. This adjustability helps bring doors into line along a run, reducing time spent re-drilling cabinet panels.
Because the plate uses the clip-on style connection, the hinge arm attaches and detaches at the plate quickly. That connection type supports efficient assembly on the bench and simplifies later door removal for refinishing or cabinet interior work while keeping the plate location intact.
The nickel-plated finish on this Salice hinge mounting plate offers a hard, corrosion-resistant surface at the mounting zone. In normal indoor cabinet environments, that finish helps the plate maintain a consistent bearing area for the hinge arm over time.
As a hinge mounting plate from Salice America, this component is designed as part of a coordinated hinge system. Using a matching plate and hinge arm system allows installers to rely on the engineered geometry of the clip-on cam design, which supports repeatable door action across multiple cabinets without custom fitting at each opening.
This product is a Salice hinge mounting plate in the hinge mounting plates class, so it serves as the cabinet-side base for compatible Salice hinge arms during door installation.
The clip-on cam adjustable design lets the hinge arm attach to the plate and be fine-tuned by the cam, which helps align doors accurately without relocating the entire mounting plate.
The 0mm plate height sets the hinge arm close to the cabinet surface, supporting cabinet layouts and drilling patterns that are designed around a zero-height hinge mounting plate.
This plate is described as a wing mounting plate because its shape extends outward from the mounting centerline, creating a broad mounting footprint on the cabinet panel.
The nickel-plated finish provides a protected metal surface, which helps the hinge mounting area stand up to everyday indoor cabinet conditions while maintaining a clean appearance.
The BAVGL09F/16 part number uniquely identifies this Salice mounting plate, helping shops reorder the same plate when matching existing hinge setups or expanding cabinet runs.
This Salice wing mounting plate from Wurth Baer Supply offers a 0mm, clip-on cam adjustable base that ties directly into Salice hinge systems. When the project calls for a Salice America hinge mounting plate with a nickel-plated finish and defined 0mm geometry, this BAVGL09F/16 plate supports consistent cabinet layouts and straightforward repeat ordering across jobs.
Sold In: 1 Each