Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hettich InnoTech Atira aluminum front panel defines the front rail element in an InnoTech Atira drawer system run, giving a continuous metal face for building custom drawer fronts along its length. The white finish supports light-toned casework where a clean, neutral rail is preferred. With a 2000mm length, this front panel spans long cabinet sections or multiple drawer modules in one piece, which helps keep horizontal lines straight over a bank of drawers. The 70mm height sets a consistent visual band at the top of the drawer side, which matters when aligning drawer fronts across a kitchen or commercial installation using the same system. As part of the Hettich InnoTech Atira drawer system, this panel works within that construction concept, supporting installers who standardize on the InnoTech Atira platform.
The 2000mm length on this Hettich InnoTech Atira aluminum front panel gives installers a long stock piece for planning multiple drawer fronts along one rail, which can reduce joints in continuous runs. Its 70mm height creates a stable dimension to design around when laying out drawer fronts in an InnoTech Atira drawer construction system. Because this panel is defined as part of the Hettich InnoTech Atira drawer system, it aligns with that product class where aluminum front elements are required. The white finish allows the panel to visually tie into matching drawer components or cabinet fronts in white schemes, supporting coordinated layouts in kitchens, baths, or commercial casework that use the same color approach.
The designation Hettich InnoTech Atira aluminum front panel links this part directly to InnoTech Atira drawer construction systems, so it fits projects built around that specific Hettich drawer platform. In a typical bank of drawers, the 2000mm length allows one panel section to extend across several drawer positions, helping maintain a single reference line when planning fronts along a run. The 70mm height interacts with the overall system geometry in the Hettich InnoTech Atira drawer class, providing a fixed band that can be mirrored across stacks for a balanced layout. With its white finish, this front panel supports cabinetry where fronts, sides, or interior components are specified in white, helping maintain a uniform appearance in visible drawer constructions tied to the InnoTech Atira system.
The aluminum material in this Hettich InnoTech Atira front panel provides a stable profile that helps hold straight lines over its 2000mm length, which is important when aligning drawers in longer cabinet or casework sections. Because the panel height is defined at 70mm, installers can base recurring layout measurements on that dimension, supporting repeatable front spacing within the Hettich InnoTech Atira drawer system. The front panel designation within the InnoTech Atira product class signals that it belongs with matching drawer components, helping keep system parts consistent across a project. The white color specification adds another layer of predictability for designers, allowing them to plan visible drawer fronts around a known neutral tone that coordinates with other white elements in the same line.
This aluminum front panel is defined as part of the Hettich InnoTech Atira drawer system, so it is intended for use within that specific Hettich InnoTech Atira drawer construction platform.
The Hettich 9194765 InnoTech Atira aluminum front panel has a length of 2000mm, which supports use across longer cabinet runs or multiple drawer positions in one continuous piece.
This InnoTech Atira aluminum front panel has a 70mm height, providing a fixed reference band for planning drawer front layout and visual alignment in the system.
The Hettich InnoTech Atira aluminum front panel is white, which supports projects where drawer components or surrounding cabinetry use white finishes.
This aluminum front panel forms the front element in an InnoTech Atira drawer construction system, helping create a continuous face that defines the drawer front zone.
This Hettich InnoTech Atira aluminum front panel is identified by manufacturer part number 9194765, which ties it to the specified 2000mm length and 70mm height in white.
This Hettich InnoTech Atira aluminum front panel, white, 2000mm, lines up with drawer projects built on the InnoTech Atira drawer system where a 70mm high, white aluminum front element is required. When a run of drawers calls for a continuous front reference in the Hettich InnoTech Atira drawer class, choosing the 9194765 part number from Wurth Baer Supply allows system-based planning around its defined length, height, material, and color.
Sold In: 1 Each