Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Latte Walnut Groove 4x10 veneer sheet describes a Chemetal Latte Walnut Groove wood veneer sheet sized 4 feet by 10 feet, so it suits larger panel layouts for cabinetry or wall treatments without rapid repeating seams. This wood veneer sheet is identified as a Latte Walnut Groove .039 veneer, indicating a thickness of approximately 0.039 inch that works well where a thin yet substantial surfacing layer is required. The SAP description notes Latte Walnut Groove 48x120 w/wood back, so the sheet measures 48 inches by 120 inches with a wood back that supports a stable bond to typical woodworking substrates. As a Chemetal product in the Wood Veneer Sheets class, this Latte Walnut Groove wood veneer gives projects a specific Latte Walnut Groove look while remaining within a familiar veneer workflow for professional shops and serious DIY users.
This Chemetal wood veneer sheet in Latte Walnut Groove uses a 48x120 w/wood back format, which means installers work with a 4x10 sheet that behaves like other wood-backed veneer materials during layout and bonding. The .039 inch nominal thickness of the Latte Walnut Groove .039 veneer gives fabricators a thin profile that still tolerates normal shop handling when trimming flush to substrate edges or routing openings. Because the sheet is categorized as a wood veneer sheet, it supports workflows already built around veneer presses, vacuum systems, or other bonding setups used for wood-based surfacing. The Latte Walnut Groove face appearance stays tied to the CT45016G012 identification, which helps align sheet orientation and part labeling during cutting, edge treatment, and final assembly stages.
This Latte Walnut Groove wood veneer sheet sits in the Edgebanding & Surfacing and Veneer Sheets category, so it aligns naturally with projects needing decorative surfacing rather than structural panels. The 4x10, or 48x120, size suits tall cabinet ends, wardrobe panels, or other vertical surfaces that benefit from a continuous Latte Walnut Groove appearance. As a wood veneer sheet with a wood back, it pairs with wood-based cores where a veneer face is desired instead of thicker laminate. The Chemetal brand and CT45016G012 part identification assist when coordinating this Latte Walnut Groove sheet with other Chemetal finishes in the same space, so designers and builders can keep a consistent surfacing story across related components.
The Latte Walnut Groove .039 veneer thickness provides a predictable profile for edge transitions, which matters when trimming flush along cabinet sides or door edges where a clean line between the Latte Walnut Groove face and the core is expected. The 48x120 w/wood back description indicates a wood-backed construction that responds in a familiar way when bonded to common substrates, helping installers anticipate movement and performance during pressing and service. Being clearly labeled as Manufacturer Part CT45016G012 and presented as a Latte Walnut Groove 4x10 veneer sheet lets shops track material by part number, reducing mix-ups and supporting repeat orders when projects expand. As a Wood Veneer Sheets product, this Chemetal Latte Walnut Groove sheet integrates smoothly into existing veneer-oriented tooling, sequencing, and finishing steps.
The Latte Walnut Groove wood veneer sheet is described as 48x120, or 4x10, so it spans four feet by ten feet for covering larger cabinet or wall panels in a single sheet.
The Latte Walnut Groove .039 veneer designation indicates a thickness of approximately 0.039 inch, giving a thin surfacing layer that still feels substantial during fabrication and finishing work.
The 48x120 w/wood back description indicates the veneer sheet has a wood backing layer, which supports bonding to wood-based substrates using typical woodworking adhesives and workflows.
This Latte Walnut Groove wood veneer sheet is produced by Chemetal, placing it within a recognized surfacing line that supports finish matching and part number-driven specification.
The manufacturer part number for the Latte Walnut Groove 4x10 veneer sheet is CT45016G012, which helps with accurate reordering and material tracking across multiple projects.
The Latte Walnut Groove 4x10 veneer sheet is classified as a Wood Veneer Sheets product in the Edgebanding & Surfacing category, so it fits into decorative surfacing scope.
This Chemetal Latte Walnut Groove 4x10 veneer sheet, identified as CT45016G012, combines a 48x120 format, .039 inch nominal thickness, and wood back construction to support surfacing-focused woodworking projects. For jobs calling for a defined Latte Walnut Groove appearance on cabinets, wall panels, or similar elements, this wood veneer sheet offers a clearly specified option that aligns with veneer-based shop workflows. Select this Latte Walnut Groove wood veneer sheet when the project design, sheet size, and wood-backed structure match the intended decorative surfacing plan.
Sold In: 1 Sheet