ABS edgebanding Grey Oak Lati 15/16 x 328 ft

ABS Edgebanding Grey Oak Lati For Woodwork

ABS edgebanding Grey Oak Lati defines this Treefrog edge banding as an ABS-based solution in the Grey Oak Lati Groove color, so installers get a consistent decorative edge that visually matches Grey Oak Lati Groove panel work across a project. The 0.039 inch thickness creates a slim edge profile that finishes exposed panel edges without adding bulky build-up, which helps doors and panels align cleanly in cabinetry runs. The 15/16 inch width covers standard panel thicknesses with room to trim, giving fabricators a bit of tolerance during application and final flush-trimming. The 328 foot roll length keeps longer runs and multiple cabinet sections on the same color lot, which supports uniform appearance across banks of doors, drawer fronts, and casework. As an edge banding in the Edgebanding, Wood category, this product is intended for surfacing exposed edges so wood-based panels present a finished, coordinated look.

Key Grey Oak ABS Edgeband Details In Practice

• The Grey Oak Lati Groove color designation E62217 ties this ABS edgebanding to that specific decorative tone, helping maintain visual continuity when edging matching panels in a room or commercial installation.
• The 0.039 inch thickness gives the edgeband a low-profile edge, which supports clean trimming and minimal transition between the banded edge and the face of the panel during finishing work.
• The 15/16 inch width aligns with common panel thickness coverage, so installers can center the band, bond it, and then trim both faces back for a precise, even edge reveal.
• The 328 foot roll format supports edging multiple cabinets, panels, or long runs from one continuous supply, which reduces color breaks and maintains the same Grey Oak Lati Groove appearance throughout.
• The ABS edgebanding construction places this product in the Edgebanding & Surfacing class, making it a suitable choice when a synthetic edge solution is preferred around wood-based components.

Edgeband Size And Material For Straightforward Application

This Treefrog ABS Edgebanding, identified as edge banding in the Edgebanding, Wood category, is built for finishing exposed edges on wood-related components so they read as part of the overall decorative surface. The 0.039 inch thick profile sits close to the panel surface, which aids in scraping or trimming back the excess without leaving a noticeable ridge. At 15/16 inch wide, the band extends past both faces of standard thickness panels, giving room for a controlled trim to final size after bonding. The ABS material provides a consistent, uniform strip along the full 328 foot roll, which supports repeatable handling characteristics from the first foot to the last in a production or shop environment.

Using Grey Oak Lati Groove Edgeband On Projects

Where This Treefrog ABS Edgebanding Fits Best

This ABS Edgebanding, Color E62217 Grey Oak Lati Groove, is suited to applications where Grey Oak Lati Groove surfaces are present and exposed panel edges need the same visual story. As edge banding, it works along cabinet sides, shelf fronts, door and drawer front edges, and similar panel edges that call for a finished Grey Oak appearance. The 15/16 inch by 328 foot roll dimension allows the same material to run across multiple casework pieces, so banks of cabinets or longer wall runs can share one continuous Grey Oak Lati Groove edge treatment. Being part of the Edgebanding & Surfacing grouping, this product is intended to complement wood or wood-based substrates where a coordinated decorative edge is essential.

Why Dimensions And Color Matter For Consistent Results

The defined 0.039 inch thickness influences how the band trims and finishes against the panel face, helping installers create a nearly flush transition that reads as part of the original surface. The 15/16 inch width offers enough overhang to accommodate small alignment variations during bonding, which supports consistent reveals after trimming on both faces. The specific Grey Oak Lati Groove color E62217 ties the edge visually to matching surfaces, so miters, corners, and long straight runs maintain the same tone from one panel to the next. Rolled at 328 feet, this Treefrog ABS Edgebanding lets shops work through many parts under a single color and batch, helping maintain uniform appearance and simplifying material planning on medium or larger jobs where Grey Oak Lati Groove is the chosen finish.

Common Questions About This Grey Oak Edgeband

Select This Grey Oak Lati Edgeband For Your Work

This Treefrog ABS Edgebanding in Grey Oak Lati Groove, at 0.039 inch thick and 15/16 x 328 foot size, gives you a defined color and dimension set for finishing exposed panel edges. With its E62217 Grey Oak Lati Groove designation and role in the Edgebanding & Surfacing, Edgebanding, Wood category, it supports projects that call for coordinated Grey Oak edges across cabinets, shelves, and casework. Choosing this specific CTE62217G9375 roll keeps material identification straightforward when planning or repeating Grey Oak Lati Groove jobs.