Kreg Cabinet Hardware Jig Pro XL - KHI-PULLPROXL

Kreg Cabinet Hardware Jig Pro XL For Precise Installs

Kreg Cabinet Hardware Jig Pro XL is a cabinet hardware installation jig that lets you install everything from small knobs to extra-large pulls, up to 38-in center-to-center. That wide working range covers typical cabinet hardware layouts on tall doors and drawer fronts, so one setup can handle most hardware runs on a project. Patent-pending two points of contact stabilize the jig on the work surface, which supports accurate drilling so knob and pull locations line up across multiple doors. A convertible, modular design lets you configure the jig for full-length or compact use, so you can match the setup to wide handles or tight spaces. Adjustable drill guides and repeatable stops work together to establish a drilling pattern once and repeat it, reducing layout time when working through a full kitchen or bank of casework.

Job-Focused Details On This Hardware Jig

• The jig installs everything from compact knobs to extra-large pulls, up to 38-in center-to-center, so one tool handles short handles on wall cabinets and long pulls on tall pantry doors without changing jigs.
• Patent-pending two points of contact provide added stability during drilling, which helps keep bit wander down and keeps hole spacing consistent from cabinet to cabinet.
• The convertible, modular design shifts between full-length and compact setups, allowing you to work comfortably on wide drawer fronts or in tighter door rails using the same core components.
• Adjustable drill guides slide anywhere along the bar, so you can set hole spacing for three-hole handles or spaced-out pulls up to 38-in center-to-center without separate templates.
• Repeatable stops on the jig lock in your settings, so once you have a layout that works on a test piece, you can repeat it across a run of fronts with consistent results.
• The jig works with left and right swing doors, which keeps door hardware layout mirrored correctly across a kitchen or bank of cabinets without rethinking reference points.

Setup, Alignment, And Drilling Workflow Details

The Kreg Cabinet Hardware Jig Pro XL uses adjustable drill guides that slide along the main bar, so you can align drilling locations to your hardware spacing before you touch the cabinet. Built-in depth stops help control drilling depth, which supports clean bores for hardware without over-drilling into cabinet interiors. The reversible settings allow you to keep reference edges consistent as you move between left and right swing doors, reducing layout changes when working around a room. Because the design is modular, you can configure a full-length setup for wide pulls or a compact arrangement for small knobs, helping the jig adapt to different cabinet styles on the same job.

Using This Jig For Real-World Cabinet Projects

Where This Cabinet Hardware Jig Pro XL Excels

The Kreg Cabinet Hardware Jig Pro XL is designed for installing cabinet hardware on doors and drawer fronts where precision and repeatability matter. Its ability to handle everything from compact knobs to extra-large pulls up to 38-in center-to-center makes it suitable for standard base cabinets, tall pantry units, and wide drawers that use longer handles. Because it works with left and right swing doors, it supports mirrored layouts on pairs of doors, such as uppers flanking a range or tall linen cabinets. The convertible, modular layout allows you to keep the same jig on hand as you move through varying cabinet widths, so a single reference system can carry across mixed sizes in a kitchen or shop-built project.

Why The Convertible, Modular Design Supports Accuracy

The convertible, modular design of this Kreg cabinet hardware jig lets you quickly switch between a full-length setup for wide pulls and a compact setup for smaller hardware, which keeps your reference points close to the work area. That flexibility helps reduce errors that can occur when switching between different homemade templates or multiple jigs. Adjustable drill guides that slide anywhere along the bar let you tailor the spacing precisely to your hardware, including three-hole handles or spaced-out pulls, which supports consistent center-to-center distances. Patent-pending dual-contact points increase stability as you drill, which helps hold alignment against the cabinet surface when repetitive drilling tends to introduce small shifts. Built-in depth stops and reversible settings add another layer of control, helping your holes line up in depth and position from one cabinet to the next, which is important when you want clean hardware installation without rework.

Common Questions About Kreg KHI-PULLPROXL Jig Use

Select Kreg Cabinet Hardware Jig Pro XL For Precision

The Kreg Cabinet Hardware Jig Pro XL offers a wide 38-in center-to-center capacity, so one jig handles everything from compact knobs to extra-large pulls across a project. Patent-pending dual-contact points, adjustable drill guides, repeatable stops, and a convertible, modular design all work together to support precise, repeatable layouts on doors and drawers. For installers and serious woodworkers planning cabinet hardware runs, this jig provides a stable, configurable drilling system that is built for accurate placement and consistent results from the first cabinet to the last.