Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series closet rod center support is a screw mounted support designed for oval closet rod sized 1-1/8 x 5/8 inches (15mm x 30mm), so it stabilizes rods built around that standard profile. The oil rubbed bronze finish matches the product description, giving closets a dark, uniform look when paired with compatible oval tubing. The support uses a 1-3/16 inch (30mm) center-to-center mounting dimension, which helps lay out fastener locations accurately on closet panels. Its overall size of 1.732 inches wide by 2.953 inches high (44mm by 75mm) defines the footprint on the mounting surface, which helps when spacing multiple supports along long closet runs. Being part of the Closet Rods & Flanges class positions it as a structural support component in a closet system, helping carry rod load between end flanges.
This US Futaba closet rod center support installs as a screw mounted component, using two #6 x 3/4 inch screws to fasten to a closet side or divider. The 1-3/16 inch (30mm) center-to-center dimension between screw locations simplifies marking and pre-drilling so holes line up with the molded bosses. With an overall width of 1.732 inches and height of 2.953 inches (44mm x 75mm), the support fits common closet side panel dimensions while leaving space above and below the rod. The oval cradle is sized for 1-1/8 x 5/8 inch (15mm x 30mm) rod, so once mounted, the tubing nests in the support and maintains alignment along the run.
This closet rod center support is listed under Shelf, Closet & Garage Organization in the Closet Tubing & Flanges category, so it is suited to closet rod runs that use oval tubing. The product is part of the Pro Value Series and sized for 1-1/8 x 5/8 inch (15mm x 30mm) oval closet rod, which positions it for use in systems built around that specific profile. The overall 1.732 inch width and 2.953 inch height (44mm x 75mm) allow the support to sit on standard closet side panels or intermediate partitions without overhanging edges, which helps when spacing supports between end flanges. Because it functions as a center support, it works in the middle of a span to reduce rod deflection between primary flanges at each end.
The 1-3/16 inch (30mm) center-to-center mounting dimension gives a fixed distance between the two fastening points, which helps repeat hole placement on multiple panels and keeps supports aligned from section to section. Using two #6 x 3/4 inch screws ties the support to the substrate at two locations, which improves resistance to twisting loads when hangers pull on the rod. The oval cradle designed for 1-1/8 x 5/8 inch (15mm x 30mm) tubing helps seat the rod in a consistent position, so multiple supports share the load evenly along the run. The oil rubbed bronze finish coordinates with similarly finished rods and closet hardware, which lets the support visually disappear into the assembly while still providing structural bearing. Together, these defined dimensions and finish characteristics support predictable layout and uniform appearance on repeated closet projects.
This closet rod center support is designed for oval closet rod sized 1-1/8 x 5/8 inches (15mm x 30mm), so it matches rods manufactured to that specific profile.
The center support is screw mounted using two #6 x 3/4 inch screws, creating a two-point attachment that secures it to the closet side or divider.
The 1-3/16 inch (30mm) C/C dimension specifies the center-to-center distance between the two mounting screw locations, guiding accurate hole layout.
The closet rod center support measures 1.732 inches wide by 2.953 inches high (44mm x 75mm), defining the space it occupies on the mounting surface.
The support is described as oil rubbed bronze, so it coordinates with other ORB closet rods and flanges in matching finishes.
This component acts as a center support for an oval closet rod, carrying intermediate load between end flanges along the span.
This oil rubbed bronze US Futaba closet rod center support is sized specifically for 1-1/8 x 5/8 inch (15mm x 30mm) oval tubing, so it matches systems built around that profile. The defined 1-3/16 inch (30mm) center-to-center mounting and compact 1.732 inch by 2.953 inch overall footprint help when laying out supports on closet sides or partitions. For closet runs using matching oval rods where a center bearing point is needed between flanges, this Pro Value Series support from Wurth Baer Supply provides a dedicated mounting component with dimensions tailored to that application.
Sold In: 1 Each