Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Federal Brace United Modular Interlocking Kit is designed for use with Federal Brace United Modular Floating Shelf Brackets and acts as a structural link when brackets are lined up end-to-end. When stud spacing is non-traditional, steel brackets can show natural flex as you span between studs. This kit works as a pseudo stud over that gap so the run behaves more like it was fastened into standard wall stud construction. By placing the Interlocking Kit on top of aligned brackets, it ties the bracket edges together. This keeps the bracket assembly acting as a continuous support, which is important when you want a unified feel across a longer floating shelf installation. The Federal Brace United Modular Interlocking Kit gives installers a defined method to connect multiple brackets into a more rigid shelf support line.
The United Interlock Kit is installed by first aligning the Federal Brace United Modular Floating Shelf Brackets in the desired end-to-end layout. With non-traditional stud spacing, this alignment happens where there is no stud at the bracket edges. The installer then places the Interlock Kit on top of the bracket run so that it bridges the junction between adjacent brackets. The Web Description states that the fastener holes in both the kit and the brackets must be accessible when it is placed. Once the holes align, connector fasteners are inserted and tightened through the kit into the brackets. Tightening these connector fasteners joins the brackets edge-to-edge, so the assembly performs similarly to a run supported at each bracket edge in standard wall stud construction.
The Federal Brace United Modular Interlocking Kit is specified for use with Federal Brace United Modular Floating Shelf Brackets, so it matches the geometry and layout needs of that particular floating shelf bracket series. The Web Description explains that it is intended for situations where those brackets are lined up end-to-end along a wall. In that layout, a standard installation would rely on wall studs positioned at or near the edges of each bracket. When wall framing produces non-traditional stud spacing, there may be no stud where two bracket edges meet. The steel brackets can then show natural flex at those unsupported edges. The Interlock Kit is used on top of the brackets at that junction so both bracket edges are tied together. This gives the installer a way to maintain a continuous, aligned support line for the floating shelf even when the wall framing pattern does not match the bracket layout.
The Web Description states that the United Interlock Kit is used as a pseudo stud when traditional studs are not present at the bracket edges. In practical terms, this means the kit spans across adjacent brackets and provides a structural link where a stud would typically be. The installer aligns the brackets, places the Interlock Kit on top, and aligns fastener holes in the kit and brackets so they are accessible. Connector fasteners are then inserted and tightened, which locks the kit and brackets together. By securing the brackets edge-to-edge through the Interlock Kit, the assembly behaves more like it was fastened into standard wall stud construction along the full length. This can be important where a long floating shelf depends on a smooth, unified bracket run rather than separate segments that can flex independently over a gap in the framing.
The Federal Brace United Modular Interlocking Kit is for use with Federal Brace United Modular Floating Shelf Brackets, so it is matched to that bracket series for connected floating shelf runs.
The United Interlock Kit acts as a pseudo stud when stud spacing is non-traditional, tying bracket edges together so the run behaves more like it is supported at those points.
The United Interlock Kit is placed on top of aligned brackets where they meet end-to-end, so it bridges the junction and connects those bracket edges into one run.
The Federal Brace United Modular Interlocking Kit measures 3 x 1.50 x 0.12 inches, giving a compact profile that fits on top of the brackets without adding bulk.
The Web Description explains that the Interlock Kit and bracket fastener holes are aligned, then connector fasteners are inserted and tightened to lock the kit and brackets together.
The Federal Brace United Modular Interlocking Kit keeps brackets securely connected edge-to-edge, which supports a continuous floating shelf run when wall stud positions do not align with bracket edges.
The Federal Brace United Modular Interlocking Kit FB-11379 gives installers a defined way to link Federal Brace United Modular Floating Shelf Brackets into a continuous support. When stud spacing is non-traditional, this kit functions as a pseudo stud joining bracket edges where framing is absent. By placing the kit on top of aligned brackets and using the accessible fastener holes with connector fasteners, the brackets are tied together edge-to-edge. This helps the assembly behave more like a run fastened along standard wall studs. For projects using the Federal Brace United Modular Floating Shelf Brackets in end-to-end layouts, the United Interlock Kit provides the specified component to address flex at unsupported bracket edges.
