Rehau PVC edgebanding Winter Fun gives cabinet and furniture projects a defined edge treatment using Rehau, Inc. PVC material. The product is identified as Rehau PVC Edgebanding, 302854-322 Winter Fun, so installers know they are working with a named color and finish that stays consistent from job to job when the same part is specified again. The SAP description 1-5/16X1MM WINTER FUN shows this edgebanding is made in a 1-5/16 inch width and 1 mm thickness, giving enough coverage for typical panel edges while keeping a slim profile at the corner. As a product classified under Edge Banding in the edgebanding category, it is intended to cover and protect exposed substrate edges, supporting a finished look on laminated or coated boards. The manufacturer part number 302854-322 ties this specific Winter Fun design directly to Rehau, Inc. for straightforward reordering.
The SAP description 1-5/16X1MM WINTER FUN indicates this Rehau PVC edgebanding is manufactured at a 1-5/16 inch width, giving installers material that spans typical board thicknesses with some margin for trimming. The same description specifies a 1 mm thickness, which is a common edgebanding gauge that balances protection at the corner with straightforward handling using standard edgebander and trimmer setups. As a product categorized as Edge Banding, it is intended to sit along the panel edge, so these dimensions directly influence how it aligns with the face material and how much trimming is needed to reach a flush, consistent profile along doors, drawer fronts, or casework panels.
The product name Rehau PVC Edgebanding, 302854-322 Winter Fun places this material in the PVC edgebanding group, so it is suited to covering exposed edges on panels in cabinet or furniture construction where PVC is specified. Being part of the Miscellaneous|Edgebanding category and the Edge Banding product class links it to projects calling for a separate edge treatment rather than exposed substrate edges. The SAP description 1-5/16X1MM WINTER FUN indicates a 1-5/16 inch width, which aligns with many panel thickness scenarios where slight overhang is preferred for trimming rather than trying to land exactly flush on application. The named Winter Fun design gives designers and builders a specific visual reference when coordinating edges with faces, supporting consistent results across multiple components on the same job.
The manufacturer part number 302854-322 connects this Winter Fun PVC edgebanding directly to Rehau, Inc., so once an installer or shop has aligned a project to this specific edge, the same number can be used again for future phases or service work to maintain continuity. The 1 mm thickness, as stated in the 1-5/16X1MM WINTER FUN description, keeps trimming passes predictable, helping edge-finishing operations run with familiar feed rates and cutter setups rather than adapting to unusually thin or thick strips. The 1-5/16 inch width gives enough material to tolerate minor alignment variation while still finishing to a neat, flush edge, reducing the chance of exposed core at the corners. Because it sits within the Edge Banding product class and Miscellaneous|Edgebanding category, shops can route this part number into the same handling, storage, and application steps they already use for PVC edging, supporting efficient, repeatable workflows on cabinet and furniture runs.
The 1-5/16X1MM WINTER FUN description indicates this Rehau PVC edgebanding is 1-5/16 inch wide and 1 mm thick, guiding how it covers panel edges and how it will trim flush.
The Winter Fun designation in Rehau PVC Edgebanding, 302854-322 Winter Fun, provides a specific visual reference so the same edge style can be repeated on doors, fronts, and panels.
As an Edge Banding product, this Rehau PVC edgebanding covers raw panel edges, helping transition between the panel face and edge for a more finished cabinet or furniture appearance.
The manufacturer part number 302854-322 uniquely identifies this Winter Fun PVC edgebanding from Rehau, Inc., allowing shops to request the same edge style on future projects.
This product is listed by Wurth Baer Supply under Miscellaneous|Edgebanding and the Edge Banding class, aligning it with woodworking and cabinet edge treatment applications.
The 1 mm thickness noted in 1-5/16X1MM WINTER FUN keeps cuts predictable, supporting clean trimming and a defined corner profile using standard edge-finishing tools.
Rehau PVC edgebanding Winter Fun, identified by manufacturer part number 302854-322 and SAP description 1-5/16X1MM WINTER FUN, gives shops a defined PVC edge option with a known width and thickness. As an Edge Banding product in the Miscellaneous|Edgebanding category from Wurth Baer Supply, it is positioned for cabinet and furniture edge treatment where exposed panel cores need a finished transition. When a project specification calls for a 1-5/16 inch wide, 1 mm thick Rehau PVC edgebanding in the Winter Fun design, selecting this exact part number aligns material, appearance, and dimensions to that requirement.
Sold In: 1 Roll