Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek cabinet latch in satin brass provides a defined latching point, so cabinet doors stay shut with a positive catch on residential or shop cabinetry. The latch case measures 1-9/16 inch wide, so it occupies a compact footprint on the door stile while still giving room for a solid mechanism. A 2-1/4 inch case height spreads the load vertically, which helps the latch sit stable on the door and resist twisting in regular use. Satin brass finish gives the hardware a consistent, warm metal appearance that aligns with other satin brass cabinet components on the same project. The projection with thumbturn is 1-3/8 inch, which brings the turning point off the door face enough for a secure grip while staying low-profile in tight spaces. As part of Emtek cabinet hardware, this latch fits into hardware schedules where coordinated finish and sizing are important.
The 1-9/16 inch case width on the Emtek cabinet latch helps determine edge distance from the door side, so installers can position the latch without interfering with door reveals. With a 2-1/4 inch case height, the latch aligns well on standard cabinet door rails, giving enough space to center the body where rail height permits. The 9/16 inch strike width defines the mating footprint on the cabinet frame, which supports accurate chisel or mortise work when a recessed fit is desired. A 1-3/8 inch projection with thumbturn indicates how far the latch stands off the surface, which matters where doors open toward adjacent walls or appliances and clearance is tight. All stated dimensions are tied directly to the 2270US4 model, so repeated orders use the same layout marks and drilling patterns.
This Emtek cabinet latch in satin brass works in cabinet applications where a defined catch is preferred over magnetic closure, because the latch body and strike work together to secure the door. The 1-9/16 inch case width suits stiles with enough flat area to accept the latch body, letting it sit fully on the wood surface. Its 2-1/4 inch case height helps it sit cleanly on mid-rail or full-height door designs, giving installers flexibility in placing the latch at a comfortable reach. The 9/16 inch strike width guides how wide the receiving surface must be on the cabinet frame or second door, so the strike lands solidly for repeated closing. Satin brass finish coordinates with satin brass knobs and pulls from Emtek cabinet hardware, allowing a consistent visual line across kitchens, baths, or built-ins that specify this finish.
The Emtek 2270US4 cabinet latch uses a defined case width and height so jigs or templates can be set up once and reused across multiple doors, saving layout time on larger runs. The 1-9/16 inch width and 2-1/4 inch height give predictable edges to reference off a stile or rail, supporting square, repeatable mounting. The 9/16 inch strike width means the receiving side can be laid out with simple measurements, helping the latch and strike meet cleanly when the door closes. A 1-3/8 inch projection with thumbturn gives users a firm grip point that stands off the door, which aids operation for all ages while still limiting how far the latch protrudes into the walk path. Because the model number and finish are clearly defined as 2270US4 satin brass, replacements on future service calls match the original look and fit when the same part is used.
The Emtek cabinet latch body has a 1-9/16 inch case width and 2-1/4 inch case height, which guides door stile layout and mounting position during cabinet installation or replacement.
The Emtek cabinet latch has a 1-3/8 inch projection with thumbturn, bringing the control point off the door face for finger clearance while staying compact on cabinet fronts.
The Emtek 2270US4 cabinet latch uses a satin brass finish, aligning with other satin brass cabinet hardware where a coordinated metal tone is specified across a project.
The Emtek cabinet latch has a strike width of 9/16 inch, defining the contact area on the frame or mating door for consistent engagement and reliable closing.
The 1-9/16 inch case width and 2-1/4 inch case height provide fixed edges to reference from door stiles and rails, helping installers standardize hole locations across multiple doors.
The description identifies this product as an Emtek cabinet latch in satin brass with defined case, strike, and projection dimensions, clarifying its role as a mechanical cabinet latch.
The Emtek cabinet latch 2270US4 offers a satin brass finish with defined dimensions, giving cabinet builders a predictable latch footprint that matches other satin brass hardware. The 1-9/16 inch width, 2-1/4 inch height, and 9/16 inch strike width simplify layout when planning new cabinets or refreshing existing doors. With a 1-3/8 inch projection and thumbturn, this latch supports straightforward operation on everyday cabinet doors. For projects calling for a mechanical catch in satin brass, this Emtek cabinet latch provides the specified sizing and finish needed to keep cabinet runs consistent.
Sold In: 1 Each