Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pionite PFA30 Printed In Tokyo is a Pionite laminate in the Pionite HPL category that provides a decorative surfacing option, so you can match visual design requirements on cabinets, fixtures, or panels where a specific pattern identity matters. This product uses the Printed In Tokyo design, giving you a clearly identified pattern name that supports consistent selection across projects and reorders. The gloss finish stated in the description creates a high-sheen surface, which affects how light reflects off doors, drawer fronts, or counters for a sharper visual impact. Being classified as laminate means it is intended as a surfacing layer over a suitable substrate, so you can separate structure from finish and plan your build accordingly. The manufacturer part number G48PFA30GL4201 ties the color and finish combination to a precise code, which helps align shop drawings, project specifications, and purchasing documents around the same exact decorative surface.
This product is classified as laminate within the Pionite HPL range, which indicates it is intended as a decorative layer applied over a separate substrate, allowing fabricators to choose core materials independently from the finished surface. The gloss finish affects handling during layout because surface sheen makes alignment and seam quality more noticeable, giving installers reason to plan joint locations where reflections will look clean. The Printed In Tokyo design designation allows drafters and shop staff to note the exact pattern on drawings, helping align cutting, bonding, and trimming steps around a single decorative specification. Using the manufacturer part number G48PFA30GL4201 on cut sheets and orders ties field notes back to an exact laminate identity, which supports consistent fabrication from one run to the next when projects repeat.
This Pionite laminate, identified as PFA30 Printed In Tokyo with a gloss finish, is suited to decorative surfacing wherever a high-sheen pattern is desired on built components such as casework faces, panels, or tops, so finish carpenters can coordinate visual design with project intent. The fact that it belongs to the Pionite HPL surfacing category places it among high-pressure laminate options widely used in the woodworking industry, helping shops integrate it into existing workflows that already handle laminate cutting, bonding, and edge treatment. The pattern name Printed In Tokyo gives designers and builders a clearly labeled visual choice, supporting project specifications that call out this exact look alongside other finishes. Because the SAP description identifies PRINTED IN TOKYO, G48 GLOSS PC, project documents can reference that same text to match internal material codes with the physical sheet during planning and fabrication.
The gloss finish on this Pionite Printed In Tokyo laminate directly influences how finished surfaces present under lighting, so installers can expect reflections to highlight joints, edges, and door alignment more than on matte options, which makes precise layout and trimming more visible in completed work. The exact product name Pionite PFA30 Printed In Tokyo lets shops synchronize orders with design intent, reducing the chance of mixing patterns when several Pionite laminates are used on a single project. The manufacturer part number G48PFA30GL4201 further refines identification, giving purchasing and CNC programming a single reference point when setting up tooling paths or labeling parts. Being in the Pionite HPL category signals that this laminate belongs with other laminate and surfacing materials offered by Wurth Baer Supply, so operations that already stock Pionite can plan this color and finish into standard inventories.
Pionite PFA30 Printed In Tokyo is a laminate in the Pionite HPL category, used as a decorative surfacing layer on compatible substrates for cabinets, panels, and similar fabricated components.
The gloss finish on this Pionite laminate creates a shiny surface, so finished cabinets or panels show stronger reflections and a more pronounced visual effect under lighting.
The Printed In Tokyo design indicates a specific pattern and look within the Pionite laminate line, allowing designers and builders to call out this exact style on projects.
The G48PFA30GL4201 manufacturer part number ties color, gloss finish, and pattern together, so purchasing and shop teams consistently reference the same laminate.
Being in the Pionite HPL category identifies this product as a laminate surfacing material, helping shops align it with existing laminate fabrication and installation workflows.
This Pionite laminate uses the Printed In Tokyo name and gloss finish, so projects that reference the same design can align new work visually with previous installations.
Pionite PFA30 Printed In Tokyo provides a clearly named gloss laminate within the Pionite HPL family, so you can specify and repeat the same decorative surface from design through fabrication. Using the G48PFA30GL4201 manufacturer part number on drawings and orders helps every stage of the project reference the identical pattern and finish. For woodworking operations sourcing laminate and surfacing materials from Wurth Baer Supply, this product offers a defined option when a high-sheen Printed In Tokyo look is required across cabinets, fixtures, or architectural millwork.
Sold In: 1 Sheet
