Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kreg Ionic Drive 6-1/2-in Plunge-Cut Track Saw gives cordless, track-guided cutting for straight, smooth, splinter-free cuts in solid wood and plywood, so cabinet, furniture, and sheet breakdown work stays accurate on repeat jobs. The saw uses a powerful 6-speed brushless motor, which drives the blade efficiently to maintain cut quality while maximizing battery life across longer cutting sessions. A fully shrouded, thin kerf 1.6 mm premium 40-tooth carbide tipped blade supports clean edges, because the narrow kerf and carbide teeth remove less material while keeping the cut line smooth. The fully shrouded retracting blade design contains the blade during setup and repositioning, which adds confidence when working on site or in tight shop spaces. This saw is designed for use with the Kreg Adaptive Cutting System 62-in Guide Track, so once dialed in, it follows a known path for dependable results.
This 20V Ionic Drive plunge-cut saw offers a cutting depth capacity of 2-1/8-in at 90 degrees, so it can handle common construction and cabinet stock thicknesses in a single pass. At 45 degrees, the saw provides a 1-1/2-in cutting depth capacity, allowing angled trims and miters through typical sheet goods and many solid-wood applications without multiple passes. The bevel cutting capacity from -1 to 47 degrees supports a range of bevel adjustments, giving flexibility for edge-beveling, scribing cuts, and non-standard angles when working with built-ins or custom components. A fully shrouded retracting blade works together with these depth and bevel settings, helping keep the blade path controlled as the plunge action starts and finishes each cut.
The Kreg 20V Ionic Drive plunge-cut track saw is designed for use with the Kreg Adaptive Cutting System 62-in Guide Track, so it runs along a defined path to produce straight, predictable cuts. When the saw is used with this guide track, the track controls the line of cut while the saw provides plunge and power, which is useful for breaking down plywood sheets or cutting panels to size. Cutting solid wood and plywood with the guide track helps reduce wandering cuts, so edge joints, face frames, and panels line up more consistently in assembly. This Ionic Drive Cordless Plunge-Cut Track Saw works within the Kreg Adaptive Cutting System approach, letting the guide track handle alignment while the saw manages depth and bevel details. Together, the saw and 62-in Guide Track support repeatable panel sizing, trimming, and rip cuts that align with layout marks instead of relying only on freehand guidance.
This KPTPS100A plunge-cut track saw uses a spring-loaded riving knife that follows the blade, so the kerf stays open behind the cut and the board is less likely to bind, supporting smoother feed and helping manage kickback risk. A selectable switch that prevents the saw from moving backward on the track adds another layer of anti-kickback control, which is especially useful when starting a plunge partway into a panel or when finishing a long rip. Safety features include a fully shrouded retracting blade and electronic blade brake, so the blade is covered during approach and then stops quickly when the cut is finished, supporting tighter, more confident workflow in busy shops. The powerful 6-speed brushless motor offers multiple speed settings, allowing the operator to match blade speed to different woods while the motor design helps maximize battery life. Combined with the thin kerf 1.6 mm premium 40-tooth carbide tipped blade, these details work together to deliver straight, smooth, splinter-free cuts that reduce rework and sanding time.
The Kreg Ionic Drive 6-1/2-in Plunge-Cut Track Saw is for cutting solid wood and plywood when combined with the Kreg 62-in Guide Track, supporting typical cabinet and woodworking panel work.
The 20V Ionic Drive plunge-cut track saw has a cutting depth capacity of 2-1/8-in at 90 degrees, allowing single-pass cuts through many sheet goods and solid-wood thicknesses.
The KPTPS100A track saw offers a cutting depth capacity of 1-1/2-in at 45 degrees, which supports common bevel and miter cuts through typical plywood and solid stock.
The Kreg 20V Ionic Drive track saw has a bevel cutting capacity from -1 to 47 degrees, giving flexibility for square, slight back-cuts, and steeper bevel applications.
The spring-loaded riving knife follows the blade to reduce kickback risk, helping the cut stay open behind the blade for smoother forward movement along the track.
The Kreg Ionic Drive 6-1/2-in Plunge-Cut Track Saw is for use with the Kreg Adaptive Cutting System 62-in Guide Track, so it follows that track for straight, smooth cuts.
The Kreg 20V Ionic Drive 6-1/2-in Plunge Cut Track Saw KPTPS100A combines a powerful 6-speed brushless motor, thin kerf 1.6 mm 40-tooth carbide tipped blade, and track-focused controls to support straight, splinter-free cuts. With cutting depth capacities of 2-1/8-in at 90 degrees and 1-1/2-in at 45 degrees, plus a bevel range from -1 to 47 degrees, it covers a wide range of cabinet and woodworking panel tasks. Pair this saw with the Kreg Adaptive Cutting System 62-in Guide Track for track-guided sheet and solid-wood cutting that supports accurate layout, faster assembly, and reduced rework.
Sold In: 1 Each