Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kreg Rip-Cut Circular Saw Edge Guide turns an ordinary circular saw into a precision edge-guided cutting tool, so a basic saw can handle straighter rip work without switching to other equipment. The guide rides the edge of your material, which keeps the saw tracking in line along the sheet edge so cuts follow your layout. It makes straight, accurate, repeatable cuts up to 24-in wide in plywood, MDF, and other large sheets, letting you break down panels to cabinet or furniture widths in one pass. The design cuts without measuring or marking, so you set width once on the scale and run multiple parts to the same dimension, which speeds up casework or shelving runs. Built for people who see every project as an opportunity for self-expression, it supports consistent material prep so assemblies fit as planned.
The universal sled clamps tool-free to most left- or right-blade circular saws, mini circular saws, worm drive saws, and jigsaws, so the same guide works across common saw body styles on site or in the shop. Sled wings adjust laterally to accommodate a wide variety of saws, which lets you center or offset the base as needed while still supporting the shoe. A lens cursor and precision scale let you set and align to your saw blade kerf, so you key the reading to the actual cut line instead of the shoe edge, which matters when you want parts to finish to dimension. Toolless swivel clamps speed installing or removing the saw, supporting quick transitions between rip guiding and freehand work on the same saw.
The Kreg Rip-Cut Circular Saw Edge Guide is designed for people who see every project as an opportunity for self-expression, so it suits woodworkers who want panel work to reflect their layout choices. It works with plywood, MDF, and other large sheets, covering typical sheet-goods used in cabinetry, furniture components, and shop projects. When crafting custom shelving, the guide maintains a fixed distance from the edge, so every shelf blank in a run matches width for cleaner installation. When ripping hardwood for furniture, the edge-guided action helps keep boards consistent, which supports uniform frame parts or rails. When slicing sheet goods for cabinetry, the 24-in capacity matches common cabinet side and divider widths, which helps generate carcass pieces that assemble square. Because the sled works with most left- or right-blade circular saws, mini circular saws, worm drive saws, and jigsaws, one guide can support different saw types in the same workflow.
The sled wings adjust laterally, so you slide them to fit a wide variety of saws, which keeps the saw shoe properly backed while the blade stays in line with the scale. Toolless swivel clamps let you tighten around different shoe thicknesses quickly, so swapping saws or repositioning for a new blade type remains a short setup step instead of a full reset. GripMaxx pads add holding power between the saw and sled, which reduces movement under load so your cut line stays aligned with the cursor. The lens cursor and precision scale work together so you can dial in to your saw blade kerf, letting you hit finished widths instead of compensating after test cuts. Because the edge guide rides the edge of the material, once you set the width and kerf position, you can repeat the same rip dimension across multiple parts without new measurements, which supports efficient batch work on panels or strips.
The Kreg Rip-Cut Circular Saw Edge Guide uses a universal sled that clamps tool-free to most left- or right-blade circular saws, mini circular saws, worm drive saws, and jigsaws for flexible shop or site use.
The Kreg Rip-Cut makes straight, accurate, repeatable cuts up to 24-in wide, allowing common cabinet, shelving, and panel dimensions to be ripped directly from full sheets.
The Kreg Rip-Cut rides the edge of your material, keeping the sled and saw running parallel to the sheet edge so the blade tracks consistently along your chosen reference edge.
The Kreg Rip-Cut uses a lens cursor and precision scale to set and align to your saw blade kerf, helping finished parts match the target width without extra layout steps.
The GripMaxx pads on the Kreg Rip-Cut clamps help the saw stay fixed on the sled, supporting consistent alignment and reducing movement during longer rip cuts.
The Kreg Rip-Cut is designed to make straight, accurate cuts in plywood, MDF, and other large sheets, supporting common sheet-good tasks in cabinetry and furniture work.
The Kreg Rip-Cut Circular Saw Edge Guide from Wurth Baer Supply turns a standard circular saw into an edge-guided cutter for plywood, MDF, and other large sheets, which streamlines breaking down stock for cabinetry, shelving, and furniture builds. Its universal sled with toolless swivel clamps and GripMaxx pads works with most left- or right-blade circular saws, mini circular saws, worm drive saws, and jigsaws, supporting a range of tools already on the job. With straight, accurate, repeatable cuts up to 24-in wide and a lens cursor and precision scale to align to blade kerf, this Kreg Tool guide supports consistent dimensions part after part.
Sold In: 1 Each