
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rehau 4533 saw-cut sand laminate is a laminate panel that provides a surfacing option in the saw-cut sand 4533 design, so projects needing a coordinated look can use a single, named pattern from start to finish. The .9mm thickness gives a substantial laminate layer, which supports a solid surfacing build where a defined laminate wear surface is desired. The 51 inch width creates coverage for wider cabinet or fixture faces in one sheet, which helps layout planning on shop panels and larger components. The 120 inch length supports long runs, such as tall panels or multiple smaller parts nested from one sheet, which can reduce seam locations across a project. This laminate sits in the Rehau HPL category, tying it into standard high pressure laminate workflows that many woodworking shops already use on casework and other surfaced assemblies.
The .9mm thickness on this Rehau laminate sets the profile that will be bonded to the core material, which influences adhesive selection within standard laminate processes and the trimming passes used after press. The 51 inch by 120 inch size establishes how the sheet will be handled on the bench or press, which guides roller, press bed, or table support setup during layup and routing. Being part of the Rehau HPL range, this laminate aligns with common high pressure laminate fabrication practices, which helps crews fold it into existing cutting, bonding, and finishing workflows. The saw-cut sand 4533 pattern ties design intent directly to a named Rehau finish, which matters when install crews are aligning field work to drawings or sample boards built around this specific code.
The 51 inch width on this Rehau 4533 saw-cut sand laminate supports panel layouts that span typical cabinet sides or door runs in a single piece, which is useful when planning cuts that keep the saw-cut sand pattern flowing cleanly across a bank of fronts. The 120 inch length allows long vertical or horizontal parts to be nested from one sheet, which gives flexibility to cut tall partitions, end panels, or multiple shorter parts while preserving orientation of the 4533 design. As a laminate from the Rehau HPL category, this sheet fits into casework and fixture workflows where laminate-faced components are standard, which helps shops use one familiar material type across carcasses, fronts, and trim elements calling for this finish. The defined saw-cut sand 4533 designation keeps the visual target consistent from drafting through shop cutting, which supports clear communication between design, production, and installation teams.
The .9mm thickness of this Rehau laminate defines both edge exposure and routing behavior at corners, which affects how crisp the finished transitions appear where the saw-cut sand surface meets adjacent materials. This thickness also plays into how much laminate buildup is present at edges, which matters when aligning doors, panels, or fillers that share the same 4533 surface in tight reveals. The manufacturer part number 318941-014 ties every sheet back to the same saw-cut sand 4533 specification, which reduces variation when a project spans multiple orders or phases and must maintain identical appearance from batch to batch. Listing this product in the Edgebanding & Surfacing Rehau HPL category places it alongside other surfacing materials within the same family, which helps shops coordinate edgebanding, faces, and other visible elements to the same Rehau 4533 saw-cut sand look.
This Rehau saw-cut sand 4533 laminate sheet measures 51 inches wide by 120 inches long, which supports large panel layouts and lets multiple parts be cut from a single sheet.
The Rehau saw-cut sand 4533 laminate has a .9mm thickness, which defines the laminate buildup used in bonding, trimming, and edge profiling during fabrication.
The manufacturer part number 318941-014 identifies this exact Rehau 4533 saw-cut sand laminate, which supports accurate reordering and matching to project specifications.
The 51 inch width lets many cabinet sides, doors, or panels be cut in one piece, which helps keep the saw-cut sand 4533 pattern continuous across visible surfaces.
This product sits in the Rehau HPL laminate category, which aligns it with standard high pressure laminate surfacing methods used on casework and fixture components.
The saw-cut sand 4533 design gives a named Rehau finish, which supports projects that call for a specific pattern match across laminate faces and related Rehau surfacing elements.
This Rehau 4533 saw-cut sand laminate in a .9mm thickness and 51 inch by 120 inch sheet format supports projects that rely on a consistent, named Rehau 4533 design from drawings through installation. The defined 318941-014 part number ties each sheet to the same specification, which is valuable when multiple builds or phases must visually align over time. Selecting this laminate connects your surfacing work to the Rehau HPL range, so casework, fixtures, and other surfaced components can share one coordinated saw-cut sand 4533 appearance across the job.
Sold In: 1 Sheet