Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formwood Almond Melamine Edgebanding gives a matching almond melamine edge that finishes exposed panel sides so cabinet and furniture projects present a uniform face. The 7/8 inch width covers typical board thickness with a small margin, helping hide minor alignment variation along the edge line. The pre-glued construction has factory-applied adhesive on the back, so installers only need to heat and bond it to the substrate during edging. This melamine edge banding arrives as a continuous 250 foot length, allowing longer uninterrupted runs on casework, shelving, or closet parts before a changeover is needed. The almond color ties into almond-tone sheet goods, keeping the transition between face and edge visually consistent. Under the FormWood brand name, the edgebanding is identified for use wherever almond melamine panel work requires a finished perimeter.
This 7/8 inch W x 250 foot Formwood almond melamine edgebanding is pre-glued, so its backside already carries the adhesive needed for bonding to panel edges. During installation the pre-applied glue layer responds to heat, allowing the edgebanding to be pressed onto the substrate without separate adhesive handling. The continuous 250 foot length supports running several cabinet sides or shelves in sequence, which helps maintain consistent line-up of almond melamine edges across a project. With the edging sized at 7/8 inch wide, typical board edges have enough coverage to trim flush while keeping the almond finish spanning the full thickness.
Formwood Almond Melamine Edgebanding fits panel work that uses almond melamine sheet goods for cabinet carcasses, shelving, or furniture components. The 7/8 inch width matches common thickness material used in these assemblies, so one size can serve many straight-edge runs on a job. Because the edgebanding is supplied as a 250 foot pre-glued roll, it suits production-style environments where operators move from one panel edge to the next with minimal interruption. The almond tone supports projects that call for a coordinated interior and exterior look, keeping cabinet sides, partitions, and shelves visually tied together around every exposed edge.
The pre-glued adhesive on Formwood Almond Melamine Edgebanding removes a full gluing step, which simplifies setup and keeps application more uniform over long edges. With the 7/8 inch width, installers get enough overhang to trim cleanly without exposing the core, helping each edge finish in a straight, flush line. The 250 foot roll length means fewer changeovers while running case parts, reducing interruptions that could shift setup or alignment from panel to panel. The almond color stays consistent from edge to face on almond melamine projects, which helps finished installations present as a single coordinated surface rather than a mix of tones. Identifying the product by the Formwood name and PGALM7/8 manufacturer part number gives shops a clear path to repeat the same material choice across future builds, supporting standardization and predictable results.
Formwood Almond Melamine Edgebanding finishes exposed edges of almond melamine panels, so cabinet, shelving, and furniture parts show a matching almond edge instead of exposed core.
Formwood Almond Melamine Edgebanding is 7/8 inch wide and 250 feet long, giving coverage for typical panel thickness and supporting multiple cabinet or shelving runs per roll.
The edgebanding has adhesive pre-applied to the back, so installers heat and press it onto panel edges without handling separate glue, streamlining edge banding workflow.
The almond color coordinates with almond melamine sheet goods, helping cabinet sides, shelves, and interior parts maintain a uniform, continuous appearance from face to edge.
Manufacturer part number PGALM7/8 identifies this specific Formwood almond melamine edgebanding in 7/8 inch width, supporting consistent reordering for repeat projects.
The 250 foot roll length supports longer cabinet or shelving runs, helping installers edge multiple parts in sequence without frequent material changes.
Choose Formwood Almond Melamine Edgebanding 7/8 inch W x 250 foot Pre-Glued when almond melamine panels need edges that match their faces and install efficiently. The pre-glued backing, 7/8 inch width, and 250 foot length together support steady shop production. Referencing the Formwood brand and PGALM7/8 part number helps standardize this almond edgebanding across cabinet, shelving, or furniture projects that call for coordinated melamine surfaces.
Sold In: 1 Roll