Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formwood black melamine edgebanding gives panel projects a finished black edge that visually ties into black surfaces or accents. This edge banding is identified as Formwood Black Melamine Edgebanding 7/8" W x 250' Pre-Glued, so every detail of width, length, and glue type is already defined for repeat jobs. As a melamine edge banding, it is designed to finish raw panel edges, turning exposed core into a uniform black edge that matches melamine style projects. The 7/8 inch width covers typical panel thicknesses with a margin to trim, helping installers hide slight edge inconsistencies after cutting panels. The 250 foot length supports longer runs or multiple cabinet and furniture builds from a single roll, which helps maintain a consistent look across a project. The pre-glued construction means adhesive is already applied on the back, so heat activation can bond it to the edge without separate glue handling.
This Formwood black melamine edgebanding uses a pre-glued backing over its 7/8 inch width, so the adhesive layer is already matched to the banding size. During installation, the pre-applied glue is activated by heat, which bonds the melamine banding to the edge and keeps the process focused on positioning and pressure rather than glue spread. The 7/8 inch size gives installers usable excess beyond many panel edges, so trimming tools can cut back to a precise line after bonding. The 250 foot roll format also means longer edges or repeated cabinet components can be run from the same material, keeping both fit and appearance predictable throughout the project.
Formwood black melamine edgebanding, listed in the Edgebanding & Surfacing category and classified as Edge Banding, is geared to finishing exposed edges on melamine-based casework, fixtures, or panels. The black melamine face provides a dark, even edge that works well wherever panel cores need a visually clean transition to surrounding surfaces. With a width of 7/8 inch, this banding is suited to edging typical cabinet and furniture panels while leaving material for a final trim pass. Because each roll carries 250 feet of material, the same edgebanding can run across tall pantry sides, base cabinet runs, or multiple shelves without changing rolls. The combination of width, color, and length helps maintain a coherent edge line from piece to piece in shop or onsite work.
The pre-glued description means the adhesive is factory-applied along the back of the Formwood edge banding, giving a consistent glue layer across the full 250 foot length. This uniform glue application supports even bonding when activated, which helps reduce edge gaps and variations along cabinet or furniture runs. The 7/8 inch width creates a small tolerance zone on either side of a standard edge, so trimming tools can fine-tune the final profile without exposing core material. The black melamine surface keeps the visual result consistent across all edges cut from the roll, helping shops produce repeatable results on repeat part numbers or future replacement panels. The specific manufacturer part number PGBLK7/8 ties these details together, giving production teams and buyers a precise way to specify the same melamine banding on drawings, cut lists, and reorders.
Formwood Black Melamine Edgebanding is 7/8 inch wide, giving coverage beyond many panel edges so the banding can be trimmed back for a clean, flush finish on cabinets or furniture.
This Formwood melamine edge banding roll is 250 feet long, allowing extended edging runs or multiple cabinet and furniture projects to use a single consistent black material.
Formwood Black Melamine Edgebanding 7/8" W x 250' is pre-glued, so adhesive is factory-applied on the back and bonds when heated during installation.
This product is described as melamine edgebanding and Edge Banding class, so it is designed to finish exposed panel edges on melamine-style casework or furniture pieces.
The black melamine surface creates a consistent dark edge, which visually ties exposed panel edges into black panels or contrasting design elements on cabinets and fixtures.
The manufacturer part number PGBLK7/8 identifies this specific Formwood black melamine edgebanding, helping shops specify and reorder the same 7/8 inch pre-glued product.
Formwood black melamine edgebanding 7/8" W x 250' pre-glued combines a defined width, a 250 foot roll length, and factory-applied adhesive to support efficient edging on melamine projects. The black melamine edge gives cabinet and furniture panels a finished look that matches dark designs, while the Edge Banding class and clearly labeled PGBLK7/8 part number simplify specifying the same material again on drawings or purchase lists. For shops and installers planning repeatable panel work, this Formwood edgebanding offers a single, clearly identified product that can carry the same edge look across current and future jobs.
Sold In: 1 Roll