Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
7/8 1mm non-glued maple edgebanding from FormWood is wood edge banding that finishes exposed substrate edges on cabinets, panels, and shelving so you get a consistent maple look along every edge. The 1mm thickness provides a solid maple edge profile that sands and flush-trims predictably, which helps keep your machining steps steady from piece to piece. The 7/8 inch width covers typical panel thicknesses with room for trimming, so you can align quickly and then trim back to a clean line. Because this maple edgebanding is non-glued, it works well in shops that prefer to control adhesive choice and spread rate for their specific processes. Sold by Wurth Baer Supply under part WBSC - 1698 - DONG1MMMAP7/8 with manufacturer part NG1MMMAP7/8, it fits easily into parts lists and shop documentation.
This non-glued maple edgebanding works as the finishing edge on wood-based components where a maple appearance is required along exposed sides. The 7/8 inch size gives you coverage for standard panel dimensions so your setup focuses on feed and trim rather than edge exposure. The 1mm thickness supports typical edgebanding equipment settings, which helps keep adjustments minimal between similar materials. Because adhesive is not pre-applied, the banding integrates into workflows that run bulk glue systems, allowing consistent glue lines across different edge materials. Under the FormWood identity and NG1MMMAP7/8 part number, this product fits organized material libraries and job folders where specific maple banding must be repeated on future jobs.
This FormWood maple edgebanding serves as a wood edging on cabinet cases, shelving, and other components that call for a maple edge treatment. The 7/8 inch width works with typical panel layouts, helping you run consistent passes on cabinet sides, tops, and bottoms that share the same thickness. The 1mm maple layer creates an edge that can be profiled or lightly eased to match adjacent maple faces, keeping visual transitions smooth along doors and casework. Because the product is defined as wood edgebanding in the Edge Banding class, it fits naturally anywhere a wood edge is needed instead of exposed core material. The maple description in the part naming also helps align this banding with other maple elements on the same project.
The combination of 1mm thickness and non-glued construction on this maple edge banding means your equipment can run a steady trim and glue routine from job to job. The 1mm build gives enough material for trimming and slight profiling without cutting through, which helps maintain an even maple reveal on multiple passes. Non-glued configuration allows you to match adhesive spread to your press time and temperature, keeping glue lines consistent with your existing parameters. The 7/8 inch dimension offers predictable overhang for trimming, reducing variation in how much excess material you carry into the cutter. With identifiable part numbers NG1MMMAP7/8 and WBSC - 1698 - DONG1MMMAP7/8, operators and purchasers reference the same maple edgebanding, supporting repeat orders and uniform results over time.
NG1MMMAP7/8 maple edgebanding is a FormWood wood edge banding used to finish exposed edges on panels, so cabinet and furniture components present a maple appearance instead of exposed core.
This maple edgebanding is described as 7/8 inch wide, giving coverage for common panel thicknesses and leaving controlled overhang for trimming to a clean finished edge.
The 1mm thickness on this maple edgebanding provides enough material for trimming and light profiling, supporting consistent edge appearance across multiple components and machining passes.
This non-glued maple edgebanding lets shops apply their own adhesive, aligning bond strength and glue type with existing edgebanding equipment and production routines.
This maple edgebanding is supplied by Wurth Baer Supply, a distributor to the woodworking industry, which positions it within a broad mix of cabinet and surfacing materials.
The WBSC - 1698 - DONG1MMMAP7/8 description and NG1MMMAP7/8 manufacturer part number uniquely identify this 7/8 1mm non-glued maple edgebanding for repeat purchasing and job documentation.
Choose this 7/8 1mm non-glued maple edgebanding from FormWood when a maple edge is needed on cabinet or panel projects and adhesive control is handled in-house. The 7/8 inch width and 1mm thickness support predictable trimming, while the NG1MMMAP7/8 and WBSC - 1698 - DONG1MMMAP7/8 identifiers keep purchasing and shop records aligned around a single, clearly defined maple edge banding.
Sold In: 1 Roll