FormWood Maple Wood Veneer Edgebanding 7/8", Pre Glued, Unfinished, 250', PGHRMAP7/8

Formwood Hard Rock Maple Melamine Edgebanding For Clean Edges

Formwood Hard Rock Maple Melamine Edgebanding gives sheet goods a matching Hard Rock Maple edge, creating a consistent appearance between faces and edges that matters on visible cabinet sides and shelves. The 7/8 inch width covers standard panel thickness with a bit of overhang, giving installers trimming tolerance for a flush, tight-looking edge. The melamine construction provides a matching melamine surface, so edges align visually with melamine panels in Hard Rock Maple tones. The 250 foot length supports longer runs or multiple cabinets from a single roll, helping maintain color continuity across a project. The pre-glued design means adhesive is already applied to the back of the banding, so once heat is applied the banding bonds to the substrate in a single operation. This combination of width, color match, and pre-applied glue supports repeatable, efficient edge finishing on cabinet, casework, or shelving jobs.

Key Edgebanding Details That Support Your Workflow

• The Hard Rock Maple melamine surface matches Hard Rock Maple faces, so finished edges visually blend into melamine panels on cabinets and casework.
• The 7/8 inch width gives coverage and trimming room on common panel thicknesses, helping achieve a clean, flush edge after routing or trimming.
• The 250 foot roll length supports multiple cabinets or longer runs, which reduces roll changes and keeps color and finish consistent across a project.
• The pre-glued backing has adhesive already applied, so activation with heat bonds the banding in one step and simplifies the edgebanding process.
• The FormWood brand and PGHRMAP7/8 part identification clearly define the product, helping match the same edgebanding on future jobs or repairs.

Edgebanding Installation And Trim-Ready Dimensions

This Formwood Hard Rock Maple Melamine Edgebanding uses a 7/8 inch width, giving extra coverage beyond common panel thicknesses so installers can trim back to a precise, flush edge. The pre-glued construction means adhesive is factory-applied to the back, so the bond is created by heating the glue layer during installation rather than rolling separate adhesive. The 250 foot length allows continuous application along multiple cabinet sides or shelves before reaching the end of the roll, which helps keep workflow moving without frequent material changes. Together, the width, length, and pre-applied glue support an installation sequence geared around heat application, pressing, and final trimming.

Using This Maple Melamine Edgebanding In Cabinet Work

Where This Formwood Edgebanding Performs Best

This Formwood Hard Rock Maple Melamine Edgebanding is suited to projects using Hard Rock Maple melamine panels, because the Hard Rock Maple color and melamine surface coordinate with those panel faces on cabinets, casework, and shelving. The 7/8 inch width makes it appropriate for edging common panel thicknesses used in cabinetry while allowing a controlled trim pass. The 250 foot roll length supports runs across multiple cabinet boxes or long shelving spans from a single roll, so visible sections of a job maintain the same Hard Rock Maple tone. With a pre-glued backing, this edgebanding fits into workflows that use heat to activate adhesive, such as applying banding to carcass edges, shelves, and vertical partitions that need a finished maple appearance.

Details That Help Achieve Consistent Edge Results

The pre-glued design of this Hard Rock Maple melamine edgebanding places the adhesive on the back at the factory, so the installer focuses on heat activation and pressure rather than adhesive spread, which supports repeatable bonds along the length of a panel. The 7/8 inch width provides overhang on typical panel edges, which allows for a trimming pass that leaves a smooth transition between banding and panel face. Because the surface is melamine in a Hard Rock Maple tone, the edge finish visually ties into Hard Rock Maple melamine panels, supporting uniform appearance on doorless cabinet ends or open shelving. The 250 foot length means a single roll can cover many linear feet, which helps keep both color and gloss consistent from cabinet to cabinet when a project calls for matching Hard Rock Maple edges.

Common Questions About This Hard Rock Maple Edgebanding

Select This Edgebanding For Hard Rock Maple Panels

Choose Formwood Hard Rock Maple Melamine Edgebanding 7/8 inch W x 250 foot Pre-Glued when edging Hard Rock Maple melamine cabinets, casework, or shelves. The 7/8 inch width, 250 foot roll length, and melamine Hard Rock Maple surface support matching, trim-ready edges across your project.