FormWood maple wood veneer sheet gives you a 24 inch wide by 96 inch long maple face, so you can skin cabinet sides, panels, or other surfaces with a continuous run that matches common casework dimensions. The sheet is described as maple plain sliced / flat cut, which creates the familiar cathedral grain appearance that blends into typical architectural and cabinet maple layouts. This product is in the wood veneer sheets class, so it serves as a thin decorative maple layer over your chosen core. The sheet uses a PSA back, meaning the back is prepared with a pressure sensitive adhesive layer that lets you bond the veneer to the substrate using applied pressure instead of separate liquid adhesive in the workflow. The A grade maple face, as stated in the description, supports clean, consistent surfacing where a higher appearance standard is important.
The PSA back wood veneer sheet design means the adhesive is already integrated on the back, so the main field work centers on surface preparation, positioning, and pressure. The 24 inch by 96 inch size lets you plan cuts so that most cabinet ends, partition panels, or tall components can be covered with fewer seams, which can simplify handling when applying the veneer with firm, even pressure. Because the face is an A grade maple plain sliced / flat cut surface, layout of the sheet relative to doors, drawer fronts, or adjacent panels can be planned so that the cathedral grain flows in a consistent direction across the run. The wood veneer sheet format also aligns with common surfacing and edgebanding workflows in shops that already work with veneer sheets.
The maple 24 inch wide by 96 inch long veneer format fits well on cabinet sides, tall panels, and similar surfaces that fall within those dimensions, so many kitchen, bath, or built-in case parts can be skinned without splicing multiple pieces. As a wood veneer sheet, it is suited for surfacing over stable cores in typical woodworking shop environments where veneer sheets are part of the standard process. The maple plain sliced / flat cut description aligns with common architectural maple, so this sheet can be used where a traditional maple grain look is needed to match surrounding casework or existing plain sliced maple elements. The A grade face gives you a maple surface ready for use in visually important locations once bonded and finished according to the project requirements.
The PSA back on this maple wood veneer sheet provides a pressure sensitive adhesive layer that is consistent across the full 24 by 96 inch back, which supports even bonding when firm pressure is applied over the field. Using a single sheet at 24 inches wide limits the number of joint lines on standard cabinet ends, which reduces the alignment work associated with matching grain across multiple narrow strips. The 96 inch length helps you orient the cathedral grain from the plain sliced / flat cut maple in a continuous vertical run, which aids in achieving a unified look on tall installations. Working with a defined A grade face also helps planning, because the quality level is aligned with visible-face applications where an appearance-oriented maple veneer is expected on the finished project.
The FormWood maple wood veneer sheet is 24 inches wide by 96 inches long, so it can cover many cabinet sides and tall panels in a single piece.
The maple plain sliced / flat cut description indicates a cathedral style grain pattern, which matches the typical look of plain sliced maple doors and panels.
The PSA back wood veneer sheet has a pressure sensitive adhesive layer on the back, so bonding relies on careful placement and firm pressure rather than separate glue application.
The A grade maple face, as stated in the description, indicates an appearance-focused surface suitable for visible cabinet exteriors and feature panels.
The 24 by 96 inch size suits cabinet ends, tall case sides, and similar panels, allowing many parts to be surfaced with a single continuous maple sheet.
This FormWood maple wood veneer sheet serves as a thin decorative maple layer over a substrate, aligning with wood veneer sheets used in surfacing workflows.
This FormWood maple wood veneer sheet combines a 24 inch by 96 inch format, a maple plain sliced / flat cut A grade face, and a PSA back, so it matches projects needing architectural maple appearance with a pressure sensitive adhesive workflow. For shops and installers sourcing wood veneer sheets from Wurth Baer Supply, this specific MAPPN38RB2F sheet offers a defined size, grain style, and adhesive-backed construction that align with cabinet sides, panels, and other maple-faced work where consistent appearance and efficient bonding are important.
Sold In: 1 Each