Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Wood Veneer Edgebanding Pre-Glued Red Oak describes a FormWood edge banding made from red oak veneer, so edge treatment visually matches red oak panels on cabinets, shelves, or furniture parts. The product is classified as edge banding, so it is designed specifically to cover and finish exposed substrate edges in woodworking projects. The red oak veneer construction provides a real-wood surface, which matters when matching stain or clear finishes across doors, face frames, and panels. The web description calls out a 0.034 inch thickness, giving a substantial veneer layer that sands and finishes more like solid wood in day-to-day shop work. The 13/16 inch width works well on common 3/4 inch sheet goods, offering slight overhang for trimming flush after bonding. The 250 foot roll length supports longer production runs or multiple jobs from a single roll, which helps keep setups and changeovers under control.
The web description lists this FormWood product as pre-glued wood veneer edgebanding in red oak, so adhesive is already applied to the back, streamlining edge treatment steps in the shop. The 13/16 inch width pairs naturally with 3/4 inch sheet goods, leaving a manageable overhang that trims away cleanly. With a thickness of 0.034 inch, the veneer edge transitions smoothly into panel faces after trimming and sanding, which matters when preparing parts for stain or clear finishes. The 250 foot roll format supports edging long runs of cabinet sides, tops, and shelves without stopping to change rolls. The manufacturer part number PGRDO13/16 gives a consistent identifier when matching this size and species across reorders or coordinating multiple stations in a shop.
This FormWood wood veneer edgebanding in red oak is positioned for edge finishing on woodworking projects where red oak is the primary species. The oak veneer face matches the species used in many cabinet doors, face frames, and shelves, which helps create a unified appearance from surface to edge. Because it is defined as edge banding in the product class and web description, it suits exposed plywood or composite edges on cabinets, casework, and furniture components. The 13/16 inch width serves typical 3/4 inch panels, so it fits common carcass and shelving dimensions used in residential and commercial jobs. The 250 foot roll length supports shop environments that run repeated cabinet parts or longer production batches, allowing several projects or a full installation to be edged from the same roll. The oak edgebanding designation in the SAP description also ties it directly to oak-based work where visual alignment with oak grain and tone is essential.
The pre-glued description signals that adhesive is pre-applied to the back of the red oak veneer, which removes a separate glue-spreading step and supports consistent bond coverage across long edges. The 0.034 inch thickness gives the veneer enough body that edges can be trimmed, eased, and lightly sanded while retaining a continuous oak face. That thickness helps the transition between edgeband and panel stand up to handling during fabrication and installation. The 13/16 inch width creates a predictable amount of overhang on 3/4 inch stock, which simplifies trimming and keeps the working process repeatable from part to part. The 250 foot roll length minimizes roll changes when running a series of cabinet components, supporting steadier throughput on edgebanding stations. Using the specific manufacturer part number PGRDO13/16 and the FormWood brand reference simplifies specifying the same material again when a project expands or repeats.
This FormWood product is described as wood veneer edgebanding in red oak, so the visible surface presents genuine red oak veneer for projects using oak components.
The red oak veneer edgebanding is 13/16 inch wide, giving coverage with slight overhang on typical 3/4 inch sheet goods for trimming flush after bonding.
The web description specifies a 0.034 inch thick veneer layer, providing enough material for trimming and light sanding while maintaining a continuous oak face.
The FormWood red oak veneer edgebanding is supplied in a 250 foot roll length, supporting edging multiple cabinet parts or larger runs from one roll.
The manufacturer part number is PGRDO13/16, which identifies this specific red oak, 13/16 inch wood veneer edgebanding from FormWood.
Product data lists it under the edge banding product class with an oak edgebanding SAP description, aligning it with oak-focused cabinetry and millwork work.
This FormWood wood veneer edgebanding, pre-glued in red oak, combines species match and simplified bonding for cabinetry and woodworking jobs. The 0.034 inch thickness, 13/16 inch width, and 250 foot roll format support efficient edge finishing on common 3/4 inch panels. The oak edgebanding designation and manufacturer part number PGRDO13/16 give clear identifiers when specifying material for consistent results across parts and future orders. For projects built around red oak sheet goods and components, this roll offers a straightforward way to bring exposed edges in line with the rest of the work.
Sold In: 1 Roll