FormWood Walnut Wood Veneer Edgebanding 7/8" x 1 mm, Unfinished, 328', NG1MMWAL7/8

1mm Walnut Edge Banding For Clean Furniture Lines

1mm walnut edge banding gives casework, shelving, and furniture panels a matching walnut edge so exposed core or raw substrate stays hidden on the finished piece. This product is a wood edge banding from FormWood, so it serves as a real-wood edging solution rather than a printed look, which matters when jobs call for walnut surfaces that read consistently across faces and edges. The 7/8 inch width works with common panel thicknesses, giving enough coverage to trim back for a flush edge. A non glued construction lets installers choose their preferred adhesive system, which helps align this banding with existing shop processes and equipment without being locked to a pre-applied glue type. The walnut species and 1mm thickness combine to provide a solid-feeling edging that visually ties into walnut-faced panels across commercial or residential work.

Walnut Edge Banding Details That Support Shop Work

• The 7/8 inch width covers typical panel edges with room to flush-trim, helping hide core material while allowing clean pass routing or trimming on cabinets and furniture parts.
• The 1mm thickness gives the walnut edge banding a substantial face, supporting crisp profiling and sanding steps on finished edges without feeling overly delicate at the workbench.
• The walnut wood construction keeps the edge visually aligned with walnut surfaces, supporting consistent grain and color transitions around doors, casework, and shelving components.
• The non glued design lets shops apply their own adhesive, integrating this banding into existing edge-banding workflows and adhesive preferences without changing equipment settings.

Non Glued Edge Banding For Flexible Installation

This FormWood wood edge banding uses a non glued format, so there is no pre-applied adhesive on the back of the strip during installation. That detail matters for shops that rely on their own glues, rollers, or edge-banding equipment, because it lets them match adhesive type and coverage to the specific substrate and production method in use. The 7/8 inch width works with many panel layouts, giving enough overhang to trim cleanly after bonding while still staying efficient on material usage during cutting and handling. Combining 1mm thickness with walnut construction creates an edge that supports normal machining, sanding, and finishing steps alongside walnut-faced panels.

Using FormWood Walnut Edge Banding In Projects

Where This FormWood Walnut Edging Fits Best

This edge banding belongs to the Edgebanding & Surfacing category under wood edgebanding, positioning it for use on cabinet, furniture, and general woodworking panel edges where a walnut look is required. The walnut construction supports visual continuity on projects that already use walnut veneers or solid walnut components, tying exposed panel edges back to the overall design. The 7/8 inch size aligns with many panel thicknesses found in casework and shelving, allowing fabricators to size and trim edges efficiently during production. Because this banding sits within a wood-focused product class, it integrates naturally wherever a real-wood edge is preferred over synthetic edging on shop drawings or design specifications. Across commercial millwork, custom residential cabinetry, or furniture runs, the walnut material and dimensional format support consistent, repeatable edging results.

Why These Edge Banding Details Reduce Rework

The combination of 1mm thickness and walnut species gives the edge face enough body for sanding and fine-tuning without quickly cutting through to backing material, which supports cleaner finishing passes and reduces the likelihood of edge repair. The 7/8 inch width, paired with non glued construction, lets installers align, clamp, and bond edges according to their preferred workflow, which can streamline setups across multiple panel sizes on the same job. Using a FormWood wood edge banding with a defined part number, NG1MMWAL7/8, also simplifies reordering and specification matching, since that identifier points directly to a 1mm thick, 7/8 inch wide, non glued walnut option. Having that clarity helps shops keep the same visual and dimensional standard from initial prototypes through follow-up production runs, limiting mismatches between batches.

Key Questions About This Walnut Edge Banding

Select This Walnut Banding For Matching Edges

This 1mm walnut edge banding from FormWood, identified as NG1MMWAL7/8, brings a 7/8 inch wide, non glued walnut option to edging work on cabinets, shelving, and furniture panels. The walnut wood construction helps keep edges visually aligned with walnut-faced components across a project. The non glued design lets installation follow existing adhesive and equipment preferences in the shop. For jobs calling for walnut edges in the Edgebanding & Surfacing class, this banding offers a clearly defined, repeatable choice.