Century Components Cascade Series waste system is a Baltic Birch vanity trash pullout that organizes a single gray 34 quart bin in a controlled, repeatable way. The Cascade Series Waste Systems are made from Baltic Birch plywood with tight dovetailed corners, which creates a rigid pullout frame that stands up well to regular opening and closing in a vanity cabinet. The unit top is routed out to perfectly match the profile of 34 and 50 qt. bins, so the bin nests securely and does not shift as the pullout moves. This vanity waste container is part of the Century Components Cascade Series Waste Systems, giving installers a consistent construction style across multiple cabinet layouts. The product is classified as a trash container for vanity cabinet applications, which keeps waste centralized in bathroom cabinetry instead of on the floor.
This 34 quart single bottom mount waste bin assembly uses Blum 170lb rated MOVENTO soft-close under mount slides, so the pullout is supported from below while the top remains clear for bin access during installation and use. Floor mount brackets tie the MOVENTO slides directly to the cabinet floor, giving installers a defined base reference when positioning the vanity waste system. Left/right and up/down adjustability in the MOVENTO under mount slides allows the pullout to be tuned within the vanity opening, which helps align the motion with adjacent fronts. Four adjustable door mounted brackets connect the cabinet door to the waste container frame, providing horizontal adjustment and door tilt control so the door face can be set to match neighboring inset or full overlay fronts.
This product is a Century Components Cascade Series gray 34 quart single bottom mount vanity waste container designed for vanity cabinet installations where a single bin is preferred. The Baltic Birch plywood construction with tight dovetailed corners gives the waste container a solid feel inside bathroom cabinetry, which is useful in higher-traffic vanity locations. The unit top is routed out to perfectly match the profile of 34 and 50 qt. bins, so the gray 34 quart bin seats into a defined opening that keeps it centered as the cabinet door is operated. This waste system is categorized under Vanity Cabinet Products and Trash Containers, which aligns it with bathroom or vanity waste handling rather than general kitchen locations.
Blum 170lb rated MOVENTO soft-close under mount slides support the Cascade Series waste system, which means the under mount hardware carries the 34 quart bin from below for controlled travel as the door is opened and closed. The MOVENTO slides provide left/right and up/down adjustability, allowing the pullout to be adjusted within the cabinet so motion, gaps, and alignment remain consistent across a run of vanity fronts. Floor mount brackets secure these slides to the cabinet floor, giving the installer a fixed reference point that helps maintain squareness over time. Four adjustable door mounted brackets provide horizontal adjustment as well as door tilt control, which lets the connected door be tuned to match inset or full overlay conditions without changing the pullout body. The unit works for inset and full overlay applications, so the same Century Components Cascade Series waste system can be used across those two common construction styles in a vanity project. The natural prefinish on the Baltic Birch plywood, described as beautifully prefinished with natural finish, creates a finished interior look that visually matches other Baltic Birch casework in the installation.
The Century Components Cascade Series waste system is made from Baltic Birch plywood with tight dovetailed corners, which creates a strong wood pullout suitable for repeated vanity cabinet use.
The unit top is routed out to perfectly match the profile of 34 and 50 qt. bins, so the 34 quart gray bin nests into a shaped opening that keeps it located during movement.
This Cascade Series vanity waste container uses Blum 170lb rated MOVENTO soft-close under mount slides, so the pullout runs on concealed, soft-closing hardware from below.
Four adjustable door mounted brackets connect the door to the waste system, providing horizontal adjustment and door tilt control for aligning the door with adjacent fronts.
The Cascade Series waste system works for inset and full overlay applications, so it can be used across those two vanity door construction styles in a project.
Floor mount brackets pair with the Blum MOVENTO under mount slides to anchor the waste system to the cabinet floor, helping maintain stable tracking in the vanity.
The Century Components Cascade Series gray 34 quart single bottom mount vanity waste container uses Baltic Birch plywood with tight dovetailed corners to create a stable pullout body for bathroom cabinetry. A routed unit top that matches 34 and 50 qt. bins holds the 34 quart gray bin in a defined position during operation. Blum 170lb rated MOVENTO soft-close under mount slides, paired with floor mount brackets, support the pullout from the cabinet floor while offering left/right and up/down adjustability. Four adjustable door mounted brackets provide horizontal adjustment and door tilt control, and the unit works for inset and full overlay applications, so the same CASBM115-34PF-18-GR system can serve multiple vanity door conditions.
Sold In: 1 Set