Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Century Components Edge Series trash pullout is a bottom mount trash pullout that organizes two 34 qt bins in a cabinet opening, so waste stays contained and accessible on a smooth sliding system. This unit is part of the Century Components Edge Series, which identifies it as a coordinated trash management solution for kitchen and bath cabinetry. The construction uses premium Baltic Birch plywood, which provides a stable wood platform that resists typical cabinet-use stresses while supporting the moving trash bins. The plywood has no edge-banding, so the exposed edges present the same Baltic Birch material as the faces, giving a uniform working surface that does not introduce separate edge materials. A 140-sheen conversion finish is applied, creating a sealed, smooth surface that helps the wood platform handle regular contact with bins and hands. The product is classified as a bottom mount trash pullout, positioning it for use inside cabinet boxes where floor-mount installation is required.
This bottom mount trash pullout uses Blum 100lb TANDEM soft-close under mount slides with four way adjustability, so the installer can mount the slide hardware and then shift the platform in multiple directions to dial in its final position. Floor mount installation brackets are part of the system, and these brackets set the interface between the pullout and the cabinet floor, so the assembly sits where the cabinet structure is strongest. The unit is designed for two 34 qt bins, which means the interior layout of the cabinet can be planned around that fixed bin footprint for consistent clearance and travel. Because the slides are under mount, they sit below the platform, giving a clear top surface that stays unobstructed for placing and removing bins during install and later adjustments.
This 34 qt double bin trash pullout is categorized as a bottom mount trash pullout for kitchen and bath cabinet applications, so it is suited to areas where a cabinet floor provides the primary structural support. The premium Baltic Birch plywood platform works within typical cabinet interiors, offering a rigid wood base that integrates with surrounding wood casework. Because the design is built around two 34 qt bins, it fits applications that need both trash and recycling, or two waste streams, in one cabinet run. The 140-sheen conversion finish on the Baltic Birch gives the working surfaces a finished feel, which supports use in visible kitchen or bath cabinetry where interior presentation and touch matter alongside function. The Blum 100lb TANDEM soft-close under mount slides keep motion controlled in these locations, so the pullout can be used repeatedly in daily kitchen or bath routines.
The Blum 100lb TANDEM soft-close under mount slides on this Century Components Edge Series trash pullout are rated at 100 lb, so the slide system is engineered to carry the platform and two 34 qt bins under typical trash loading while maintaining a consistent glide. The soft-close feature manages the last part of travel, drawing the platform into the cabinet with a controlled motion that helps keep the bins seated and reduces impact at the cabinet front. Four way adjustability in the slide system provides adjustment in multiple directions, letting installers move the platform to achieve even spacing between the pullout and adjacent cabinet parts. This adjustability helps compensate for small variations in cabinet construction while still presenting a centered, square alignment. Floor mount installation brackets connect the assembly to the cabinet floor, and this fixed interface supports consistent slide tracking over time by tying the moving hardware to a stable base plane.
The trash pullout uses premium Baltic Birch plywood for the platform, which provides a rigid wood base that works well inside typical kitchen and bath cabinet interiors.
The Century Components Edge Series trash pullout is designed for two 34 qt bins, allowing separate waste or recycling streams to be organized on one sliding platform.
The trash pullout uses Blum 100lb TANDEM soft-close under mount slides, which support the load of the platform and bins while providing concealed, smooth, soft-close motion.
The four way adjustability on the Blum TANDEM slides allows the installer to shift the pullout platform in multiple directions to align with cabinet faces and interior clearances.
The floor mount installation brackets secure the bottom mount trash pullout to the cabinet floor, creating a stable mounting point that supports repeatable slide operation.
The 140-sheen conversion finish seals the Baltic Birch plywood surfaces, giving them a smooth, finished feel that handles regular contact with bins and hands.
The Century Components Edge Series trash pullout EDGBM140-34PF-BP pairs a premium Baltic Birch plywood platform with Blum 100lb TANDEM soft-close under mount slides, creating a bottom mount trash pullout suited to kitchen and bath cabinetry. Its design for two 34 qt bins concentrates waste handling in one cabinet bay, while four way adjustability and floor mount installation brackets support accurate alignment and stable daily motion. For projects calling for a wood-based, soft-close under mount solution within the Edge Series line, this trash pullout offers a defined combination of material, slide technology, and bin capacity ready to integrate into cabinet layouts.
Sold In: 1 Package