Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kreg 20V Ionic Drive compact drill delivers a compact 5.9 in design that fits into tight spaces, so you can drill and drive inside cabinets, toe kicks, and other confined areas without struggling to position the tool. The drill delivers 650 in-lbs of torque, which drives wood screws and drill bits strongly and efficiently, helping projects move faster even in dense stock. A two-speed gearbox with 0-500 RPM for torque and 0-2000 RPM for speed lets you match power or speed to the task, supporting both controlled driving and faster drilling in repetitive work. The tool uses 20+1 clutch settings to prevent overdriving screws, protecting work surfaces and fasteners from damage during installation. An all-metal 1/2 in chuck provides secure bit retention, keeping bits from slipping under load. Sturdy metal housing with premium metal gearing supports long-lasting reliability under regular shop or jobsite use.
The compact 5.9 in overall length allows the Kreg 20V compact drill to fit between cabinet sides and into other restricted spaces, which supports more direct drilling angles and cleaner holes. With 650 in-lbs of torque available, the drill can power fasteners and bits through typical woodworking materials while maintaining steady drive, helping reduce time spent reworking partially driven screws. The two-speed gearbox, rated at 0-500 RPM for torque and 0-2000 RPM for speed, provides usable ranges for both precise driving and faster boring, so one tool can handle varied shop tasks. The 20+1 clutch settings give repeatable control over screw-driving torque, which aids in achieving uniform results across a run of hinges or hardware. The all-metal 1/2 in chuck secures bits firmly, supporting accurate holes and consistent driving under load.
The Kreg 20V Ionic Drive 1/2 in compact drill uses a compact 5.9 in design for easy access in tight spaces, so it can operate inside cabinet boxes, under shelving, or near walls where standard-length drills can interfere with adjacent surfaces. This shortened body helps maintain a workable drilling angle even when clearance is limited, allowing holes and fasteners to be placed where the layout demands rather than where the tool fits. Because the drill stays closer to the fastener location, it supports steadier bit alignment, which can result in cleaner entry and reduced bit wander during drilling. In narrow toe kicks or closet interiors, this compact form factor lets installers position the chuck close to the workpiece, supporting accurate placement of hinges, brackets, and other hardware that must align with existing components.
The drill delivers 650 in-lbs of torque, providing strong, efficient drilling and driving that supports pushing larger wood screws and common drill diameters through typical woodworking materials without frequent stalls. A two-speed gearbox rated at 0-500 RPM for torque and 0-2000 RPM for speed allows switching between higher torque work and higher speed drilling, so tasks like driving structural screws can run in the low range while repetitive pilot holes use the faster range for productivity. The 20+1 clutch settings work to prevent overdriving screws, which helps keep fastener heads flush and reduces the risk of breaking through veneer or finished faces on cabinets and panels. An all-metal 1/2 in chuck contributes secure bit retention and long-lasting performance, so bits stay centered under load and repeated bit changes do not quickly wear the gripping surfaces. Sturdy metal housing with premium metal gearing supports long-lasting reliability, allowing the mechanism to handle frequent cycling between torque settings and speeds over time. The drill is backed by a 3-year limited warranty, reflecting manufacturer support during normal service life.
The compact 5.9 in design supports work in tight spaces, so drilling and driving inside cabinets, near walls, or in confined frames becomes easier and more direct.
The 650 in-lbs of torque provides strong, efficient drilling and driving, pushing common screws and bits through woodworking materials with reduced stalling during demanding tasks.
The 0-500 RPM range supports high-torque driving, while the 0-2000 RPM range favors faster drilling, so one drill can cover controlled fastening and higher-speed boring.
The 20+1 clutch settings limit torque to prevent overdriving screws, helping maintain consistent screw depth and protect finished surfaces from damage.
The all-metal 1/2 in chuck offers secure bit retention and long-lasting performance, so bits stay tight under load and the chuck resists wear during frequent changes.
The sturdy metal housing and premium metal gearing support long-lasting reliability, allowing the drill to handle regular use without quickly wearing critical drive components.
The Kreg 20V Ionic Drive 1/2 in compact drill combines a compact 5.9 in design with 650 in-lbs of torque, so it brings strong drilling and driving power into confined spaces where longer tools struggle. The two-speed gearbox with ranges of 0-500 RPM for torque and 0-2000 RPM for speed, together with 20+1 clutch settings, offers usable control across varied fastening and drilling tasks. An all-metal 1/2 in chuck, sturdy metal housing, and premium metal gearing support long-lasting performance across repeated projects. Backed by a 3-year limited warranty, this drill is positioned as a practical choice for woodworkers and installers who need compact reach with solid power.
Sold In: 1 Kit